-
-
Dartin Bout replied to the thread TOPPING EHA5 on Apos Audio: Unlock the True Potential of Your Electrostatic Headphones🎧.I got the same email and I ordered it the same day as you. As I posted to ASR. "I'm ok with waiting as I'd rather not be the first to...
-
Dartin Bout replied to the thread Topping DX7 Pro - DAC and balanced headphone AMP with ES9038pro and Bluetooth 5.0.Thanks for the confirmation. It's still a PITA to get in but I did get a visual guide from Topping when I asked. They sent it with the...
-
Dartin Bout replied to the thread Topping DX7 Pro - DAC and balanced headphone AMP with ES9038pro and Bluetooth 5.0.I am running V6 Vivds in the DX7 Pro in the pre circuit and I like it. The Burson extender legs are fragile as a daddy long legs with...
-
Dartin Bout replied to the thread Topping DX7 Pro - DAC and balanced headphone AMP with ES9038pro and Bluetooth 5.0.I have the DX7 Pro with Burson V6 Vivid in the preamp stage. The "Daddy Long Leg) extensions work fine but they are fragile. I don't use...
-
Dartin Bout replied to the thread Topping DX7 Pro - DAC and balanced headphone AMP with ES9038pro and Bluetooth 5.0.I used the extenders with the V6 Vivids in the pre-amp (set to exclusive mode). A little hot glue allayed any movement worries. I am...
-
Dartin Bout replied to the thread Topping DX7 Pro - DAC and balanced headphone AMP with ES9038pro and Bluetooth 5.0.I use the Burson's in the pre-amp stage and connect the A90. Heaven......
-
Dartin Bout replied to the thread Topping DX7 Pro - DAC and balanced headphone AMP with ES9038pro and Bluetooth 5.0.Burson makes extenders to allow the V6 to recline comfortably,
-
Dartin Bout replied to the thread FiiO EH3 NC- aptX/aptX Low Latency/LDAC/aptX HD,50 hours battery life,1000 hours standby time,Bluetooth 5.0,ADI noise cancelling technology,One-touch NFC,Large 45mm drivers.I have the mesh pads and they were disappointing in comparison to the originals. Mine have completely separated around the inner...
-
Dartin Bout replied to the thread FiiO EH3 NC- aptX/aptX Low Latency/LDAC/aptX HD,50 hours battery life,1000 hours standby time,Bluetooth 5.0,ADI noise cancelling technology,One-touch NFC,Large 45mm drivers.I just notice my pads have done the same thing. Spilt completely around the inner seam. Hey Fiio? ARe you going to fix this?
-
Dartin Bout replied to the thread DROP + THX Panda Announcement.I have been searching for an LDAC TX that would work with my PC. After reading the specs before purchase, I saw that it would achieve...
-
Dartin Bout replied to the thread FiiO BTA30,Hi-Fi desktop bluetooth receiver&transmitter,RCA/Optical/Coaxial interface.I haven't run into that issue. It does take a few seconds for the TX to my headphone connection to work at the beginning of each new...
-
Dartin Bout replied to the thread FiiO BTA30,Hi-Fi desktop bluetooth receiver&transmitter,RCA/Optical/Coaxial interface.It is not the best way to use it as it is limited to 16bit 44.1/48k . The optical does 24\192 and the coax does DSD64(DoP) and will TX...
-
Dartin Bout replied to the thread FiiO BTA30,Hi-Fi desktop bluetooth receiver&transmitter,RCA/Optical/Coaxial interface.I have a couple of choices, The Realtek coax built into my motherboard. In addition, I have a customized C-Media soundcard for my...
-
Dartin Bout replied to the thread FiiO BTA30,Hi-Fi desktop bluetooth receiver&transmitter,RCA/Optical/Coaxial interface.I can also confirm that this does work and sounds splendid using LDAC TX (I tested the RX on Panda THX, the BTR5 and Fiio EH3).
-
Dartin Bout replied to the thread Audio-Technica ATH-DSR9BT/ATH-DSR7BT Bluetooth Headphones (With Digital Drive Technology That Replaces a Traditional DAC).The Drop THX Panda should be considered as best of breed. Coupling that with the Fiio BTA30 produces a very functional LDAC combo.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…