You can't, and wouldn't want to under any circumstances. You would no doubt overload the input stage. Check the specs of your amp to find out what signal input provides full rated power output. I'll bet my last dollar it's near or not much above 2 volts

OK, I forgot how the installation works, I haven't done it in a while and don't even have this DAC anymore. There is no "EXE" file, it does not install that way. From what I can recall, you plug the dac in via usb, but don't let windows automatically start searching for the driver. Stop it, and...

right here: https://drive.google.com/drive/folders/0B9ceXyXtpaqUdEtETE9jclhPRlE i posted this on 4/29/17...it might be in a different Anedio thread. This is something I'll keep up there for a while. Remember to copy ALL the files and begin with the setup.ini file. BTW, there is no "exe" file...

Yeah, go here: https://drive.google.com/open?id=0B9ceXyXtpaqUdEtETE9jclhPRlE The same link should be on the "official" Anedio thread too, somewhere...

By "pure dac" do you mean fixed output? That can be changed to variable by removing an internal jumper. See this post: http://www.head-fi.org/t/676930/audio-gd-nfb-28/1530#post_12780080

Only their $15k amp...it SHOULD be good enough!

Yep I thought the HE6 was bad enough sounding to possibly being defective

Yep, that was the highlight for me too. Thanks for the listen!

Lee, Ok I Pm'd you a while back but making it official here. I can bring my modded Audio-gd NFB-28 and Anedio D-2, and PWT transport. And Sennheiser HD-580 phones.. But can't get there until after 1pm.

OK, try this... https://drive.google.com/drive/folders/0B9ceXyXtpaqUdEtETE9jclhPRlE?usp=sharing   There are 13 files in the folder

I am having trouble sending the driver to the 2 people who requested it. Apparently some mail servers think there's a virus attached to the files. Don''t know how to resolve this...my anti-virus says the files are clean

Their website is down, looks like they might have gone belly-up. I have the driver for Win 7/10, it's small (less than 1.5Mb). PM me with your e-mail & I can send it to you. Unless there's another way to post it here? I don't know how to do that.

Do you want better dynamics, depth, & a bigger soundstage from this unit? (I'm sure it would work with other models too). You can get that for free with a simple mod I performed. All you have to do is separate the Left & Right bundled, balanced wires that go from the board to the rear XLR & RCA...

If you want to change from fixed to variable outputs, you have to remove the jumper that's normally in the little red rectangle in this picture:   I might be able to live with this unit's quirky remote volume control. The High/Low gain button reminds me of the -20db muting switch you'd find...

Analysis Audio Omega, from Greece. Uses a planar magnetic mid/woofer, & ribbon tweeter. Full specs here: http://analysisaudiousa.com/omega.php I've heard nothing better, only a few that equal them (and those are always 2-3x more). It's the only planar I've ever heard that does bass & dynamics...