I don't suppose this would be of any help. http://anythingbutipod.com/2010/03/how-its-made-akg-k702-headphones/

lolidunno   I would imagine the headphone out on the SR605 would be amplified or you wouldn't hear anything. I couldn't tell you how much power the amplifier provides, or how nicely it'll amplify. That's for you to decide. It's up to you to decide what kind of amplifier you eventually want...

Don't think it'll only cost you $250 for the amplifier. The little things will add up, and before you know it, you'll be over the $300 mark. Don't forget you have to pay for a power source; you get to pick between an all in one wall wart, or to build your own. Last time I checked, a s11 would...

What? No mention for speakers? Not to mention all the power cables, filtering boxes, carbon fiber wall socket plates, and cable risers people tend to buy.

If you can find it, the Amphenol ACJS-MHD958 is a dual jack unit, with one for 1/8 and one for 1/4 output. It just uses two sets of pins, but it's cool to have it in one unit. Simple enough to wire up too. Mouser doesn't carry it anymore it'd seem, however. They still carry the MHDE though...

Excuse me sir, but your headphone stand doesn't cost nearly enough for the headphones you will be putting on them, nor did you use superior premium exotic materials that are functionally identical to the materials you used. Prolonged usage of cheaper materials will degrade the sound quality of...

Wow, I don't know what to say. I'm going to go commit sudoku now. Completely forgot to check for a datasheet. Er, what direction is that diagram looking at the transformer from. The bottom?   When they say apply 115v across 6 and 5, that means a voltage difference of 115v across 6 and 5...

Gah, seriously? Now I feel sad. Just so we're clear, the phasing dots are on the middle two prongs. Don't I want current going in on those prongs?

Welp. Hooked up the transformer (not to the CK2III board, just the IEC outlet) and blew the fuse when I switched on the power. Changed the fuse, made sure ground had a connection, tried it again, same result. Ideas?   PS: Fastons are the worst things I have yet encountered, including working...

Don't know about your NYS231s, but mine have a shorter lug for left, longer for right, on the respective sides, and the big one for ground.

Naked women.   Last minute check before I set everything on fire: Is the wiring in the picture in the first post correct?   EDIT: A thought occurs: The little dots mean something. For example, if I'm doing my reading correctly, I've got the wires backwards.    Also, am I only...

You could just use a multimeter to find out.   Last I checked, the left post is left, the right post is right, and the bottom is ground. Simple as that.

I use rhodium-gold-silver eutectic solder only. Each metal is at 5N purity before being mixed in individually determined proportions to ensure the mixture is truly at the eutectic point for each batch. The rosin for the flux is extracted from only the rarest trees, and preserved in cryogenic...

I ended up spending $300 on a $200 CK2III build.   Quadruple check your BOM, each time on a different day.

Funny. I like the bass and the highs, and don't give a **** about the mids. Soundstage is amazing for a closed headphone.   Only thing I'd replace is the earpads for something that won't fall apart.   PS. Dam is censored. The more you know.