Sounds similar to the JCat Netcard.

There should be plenty of pics and comments about this in this thread, just do a search and you should be able to find what you need. Take a look starting at page 183 in this thread.

What's the difference with/without EtherRegen using direct connection method from PC to Rednet device? I have JCat Ethernet Card on my PC that goes directly to Rednet D16. JCat (CCHD-957) and EtherRegen (CCHD-575) both use Crystek Femto clocks for phase noise. I doubt adding another device to my...

Selling my BHSE amp. Please see the link below. https://www.head-fi.org/threads/bhse-el34-tubes-sr-009-srm-1-package-deal.906602/

I don't want to give anyone the impression that I'm currently using my BHSE amp and rolling tubes. I haven't used my amp for about 4 years now, with the exception of about 5 hours to make sure it was still working properly. Since I retired (4 years ago), I only use my home stereo. I just wasn't...

No, I have not listed my BHSE yet. Yes, it's working with other tubes.

If anyone is interested in acquiring NOS tubes for their BHSE, I've just listed 4 quads (2 quads XF2/OO, and 2 quads XF4/DD), and a used quad of XF3's. Not much of a deal really, as I'm looking to get what I paid for them (4 years ago). Prices have gone up since, but I've listed them for what I...

Thanks Pete, it's nice we can share these types of things.

If you've lost your D16 from Rednet Controller, try unplugging your LAN cable from the D16. Use a single cable, and plug one end into the Primary and other end into the Secondary ports of the D16. Once the lights begin flashing, unplug both ends and put you original LAN cable back into the...

Thought I'd post this here instead of the Rednet thread since it's a DIY thing. Reading around on the internet, there's some thought that using 100mb/s has less noise than 1gb/s. So I changed the pcie setting in Windows to 100mb/s and had no issues at all (latency didn't change at all either)...

Basically, yes to all your questions with the exception of the convolution (I have no experience with it). Maybe someone else might use convolution with Dante that could reply. My advise is to wait until JayNYC receives his, and see if he posts anything about it (or send him a PM).

Yep, 5v, =>2.5A, =>28W (you can see it all on the back of the Mean Well picture you posted above). I don't think it would hurt to go 5v, =>3A, =>30W. You'll need a special cable made that goes from the LPS (2 wire DC connection) to the 5pin din unit using pins 3, 1 or 2 (common). There are...

I don't think there's a simple plug and play replacement for what you're asking (JJ's post confirms this). Before you run out and buy an LPS, what about this? If you can build your own adapter, you could make a cable (female to male) with pins 3, 1 or 2 (or both 1 and 2 for this cable). This...

Ravenna has the ability to do DSD, so I think SR becomes more important for them. Like gefski, I'm 99% Redbook, so I just use the same SR for everything (SR really means nothing for me at this time).

Still have the 6700k cpu/mobo, it was booted to the curb by the low powered Mini-ITX with 12v LPS, and other 5v LPS for PCIe and SSD. Since these Rednet devices only go as far as 192/24, it really makes no sense too me that they require anything more. The guy's wanting more horsepower are using...