-
-
dakanao replied to the thread Sennheiser HD650 & Massdrop HD6XX Impressions Thread.I also tried all of SBAF mods and the CC driver mod. The SBAF mods mostly lower bass quantity, no matter which mod they don't get rid of...
-
dakanao replied to the thread Sennheiser HD650 & Massdrop HD6XX Impressions Thread.It certainly is for many. You can get roughly the same sound as tubes on typical solid state by doing the mod, for those wondering.
-
dakanao replied to the thread Sennheiser HD650 & Massdrop HD6XX Impressions Thread.Removing the silver screen and using micropore tape around the diaphragm perimeter (1 or 2 layers, depending on your preference) and...
-
dakanao replied to the thread Sennheiser HD650 & Massdrop HD6XX Impressions Thread.Even better when you remove the silver metal mesh and replace it with felt tape :)
-
dakanao replied to the thread Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc).I meant regular Spiral Dot tips aka EP-FX9, not the + version because that one and the ++ have a different material then the regular...
-
dakanao replied to the thread Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc).Yes I tried other silicon tips on other IEMs, but I always found they add a metallic tinge to the sound compared to foam tips. You're...
-
dakanao replied to the thread Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc).Comply T-500 medium or large, depending on what fits you best. No it's the opposite, it's better in reverse because that way the tip...
-
dakanao replied to the thread Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc).For those that gave up on MH750/755 because they found them too shouty: if you remove the vent sticker in the back of the driver, all...
-
dakanao replied to the thread Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc).It can actually be extremely pleasant if you remove the all vent stickers from the back of the driver, then use Comply foam tips in...
-
dakanao replied to the thread Sony budget earphone discussion thread (MH750, MH755, MH1C, EX300, etc).So I bought one today. Mine has the 2 solder dots and off centered driver vent. Interestingly, when I took off the vent damping, there...
-
dakanao replied to the thread New Beyerdynamic Pro X line: DT 700 Pro X and DT 900 Pro X.Which one would have more bass impact between DT770 Pro 250ohm and DT700 Pro X, when both have the same pads, foam discs and clamping force?
-
dakanao replied to the thread Beyerdynamic DT770 Pro 250ohm Impressions Thread.So I did some mods to these. My pair was pretty neutral on arrival with a distant midrange mild treble peak, certainly no boosted bass...
-
dakanao replied to the thread AudioQuest NightHawk Impressions and Discussion Thread.You can add a rubber band on the headband.
-
dakanao replied to the thread Stacking magnets?.So I tried a 15mm diameter magnet on my open back CAL, with rear sticker removed, in the attracted position. It made it less sensitive...
-
dakanao replied to the thread Stacking magnets?.What would the sound difference between a small magnet (like on the pics of Slater) and an identically sized magnet? Both with the same...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…