Listing ID:
6498
Views:
785
900.00 USD
- Condition
- Excellent/Like new
- Negotiability
- Or best offer
- Ships to
- United States of America
Like new Quicksilver SET Class A Tube Headphone Amplifier. I have 100% feedback on Head-Fi, Audiogon, AudioMart and EBAY.
The Quicksilver Headphone Amp will drive any headphone to very loud levels and uses no circuit boards or transistors. It is completely point to point handwired and the only components in each channel signal path are 2 tubes, an Alps volume control, 1 capacitor and 1 output transformer.
Specifications
Dimensions 12″ deep x 7″ wide x 5.5″ high
Weight 16 pounds
The Quicksilver Headphone Amp will drive any headphone to very loud levels and uses no circuit boards or transistors. It is completely point to point handwired and the only components in each channel signal path are 2 tubes, an Alps volume control, 1 capacitor and 1 output transformer.
Specifications
| Output type | transformer coupled single ended class A triode |
| Input impedance | 100 kohms |
| Output impedance | 2.2 ohms |
| Gain | 24 db |
| Power Consumption | 38 watts |
| Tube Complement | 2-12AX7 input 2-6BQ5 output |
| Maximum output | 7 volts rms into 30 ohms or higher load |
| Polarity | Non inverting |
| Distortion | less than .01% at 1khz into 30 ohms or higher load |
| Recommended headphone impedance | Will drive any headphone from 20 to 600 ohms impedance |
Weight 16 pounds
Listed by:
snatex (24)
Listed:
2021-06-21
