You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
The Qudelix-5K thread
- Thread starter peter123
- Start date
I have my phone connected to qudelix but when i fiddle with the Eq the sound doesn't change, at all. What step or setting am i missing here?
XTF1
100+ Head-Fier
- Joined
- Nov 9, 2014
- Posts
- 433
- Likes
- 498
Not sure what’s wrong… I entered your EQ, and the difference between this:I have my phone connected to qudelix but when i fiddle with the Eq the sound doesn't change, at all. What step or setting am i missing here?
...and that:
…is very audible!
Have you tried plugged to a PC with the Chrome extension?
EDIT: Oops, I just see you were using the 20-band GEQ. I tried your EQ (up to 710Hz), and same conclusion: easily audible…. The -6db Headroom by itself has a significant impact.
Last edited:
Hypops
500+ Head-Fier
When you say "connected," how do you mean? Bluetooth or USB cable? And how connected to your headphones/IEMs? SE or balanced?I have my phone connected to qudelix but when i fiddle with the Eq the sound doesn't change, at all. What step or setting am i missing here?
When you say that you "fiddle with" it and "the sound doesn't change," do you mean you're directly A/Bing it by toggling it on and off? Or are you comparing it in some other way?
Also, what player are you using on your phone? Does your player have any DSP/EQ of its own that it's applying?
And if you haven't already, reboot both the Qudelix and your phone, and delete and redownload the app.
Last edited:
Connected by bluetooth. Yeah i toggle, sweep the bands up and down (which should be very audible, and is with any other EQ i've ever used), disconnect from Bluetooth altogether. No difference, and believe me i notice small differences. Actually that's not true - i can tell a difference when the Qudelix is connected vs not connected. But the EQ itself doesn't seem to be applying, it's just a general difference in clarity or something.When you say "connected," how do you mean? Bluetooth or USB cable? And how connected to your headphones/IEMs? SE or balanced?
When you say that you "fiddle with" it and "the sound doesn't change," do you mean you're directly A/Bing it by toggling it on and off? Or are you comparing it in some other way?
Also, what player are you using on your phone? Does your player have any DSP/EQ of its own that it's applying?
And if you haven't already, reboot both the Qudelix and your phone, and delete and redownload the app.
. I'm not using any player with my phone. (Samsung)
I can try rebooting it, but it's newly installed. It's very possible i'm missing something obvious here, i'm not technically minded.
Last edited:
Hypops
500+ Head-Fier
Sorry, by "player" I mean playback software on your phone. What app are you using to play/stream music?I'm not using any player with my phone. (Samsung)
EDIT: Also, I just tried out your EQ settings. Depending on the track, your EQ might be making only a subtle difference (you're boosting the lower midrange). It might be working, but because of what you're listening to, you might not notice much difference. I would try a more extreme cut or shelf (not a boost) in an area where you might notice it better. Easier still, set the headroom to -20 or something (just be sure to set your reference listening volume with EQ off!).
Last edited:
Knee Deep In Epoxy
500+ Head-Fier
trying to apply 3.03 firmware on android first then on windows via USB. It seems to be getting stuck at rebooting over and over again. As of typing in this latest attempt I'm at around 10 mins of waiting for the reboot to complete (which has never happened on previous updates).
Anyone else experiencing the same or otherwise have any suggestions? is this particular update supposed to take this long to be applied?
EDIT - of course now it decides to update fine after over an hour of trying and then making a public muppet of myself which such a noob question.... carry on...
Anyone else experiencing the same or otherwise have any suggestions? is this particular update supposed to take this long to be applied?
EDIT - of course now it decides to update fine after over an hour of trying and then making a public muppet of myself which such a noob question.... carry on...
Last edited:
XTF1
100+ Head-Fier
- Joined
- Nov 9, 2014
- Posts
- 433
- Likes
- 498
If you select “AUTO”, when there is no input from BT and USB go a while, the 5K will (auto) shutdown. If you select “ALWAYS ON”, it’ll simply idle—low power usage but not zero.Tell me what this item is in the application menu? Thank you.
vlad335
New Head-Fier
- Joined
- Sep 28, 2015
- Posts
- 13
- Likes
- 15
Question on the Qudelix 5K. I want to try this as a DAC from my PC. Feeding a Drop + SMSL HO150X amp balanced amp. The connection from the 5K would go into the rear panel XLR's correct?
I suppose I would need a 2.2mm to stereo XLR balanced cable to feed the amp. Where can I get such a thing? Google searches I come up with just headphone cables.
I suppose I would need a 2.2mm to stereo XLR balanced cable to feed the amp. Where can I get such a thing? Google searches I come up with just headphone cables.
kalibri
100+ Head-Fier
You make your own, but, you will need some soldering skills and kit for this, nothing fancy, just basic soldering tools and a bit of practice if you have none.Question on the Qudelix 5K. I want to try this as a DAC from my PC. Feeding a Drop + SMSL HO150X amp balanced amp. The connection from the 5K would go into the rear panel XLR's correct?
I suppose I would need a 2.2mm to stereo XLR balanced cable to feed the amp. Where can I get such a thing? Google searches I come up with just headphone cables.
Depending on your budget, get an USB-C soldering iron like the Miniware TS80P or something more fancy like a soldering station, some flux, leaded tin and most important don't breathe in the fumes.
Alternative, find someone to make the cable for you, many Aliexpress stores take custom orders.
Is your XLR input 4-pin?
Last edited:
zilax002
100+ Head-Fier
I've been lucky to never have this much trouble but I've never (not once) gotten the 5K to update with Android (over BT or wired USB). I assume it must work for someone since it's an option, but it might as well not exist for me given its 100% failure rate. But I don't use the 5K with my laptop or computer, really, so I'm always tempted to just try and update it with my phone for simplicity sake. Hasn't done me any good though!trying to apply 3.03 firmware on android first then on windows via USB. It seems to be getting stuck at rebooting over and over again. As of typing in this latest attempt I'm at around 10 mins of waiting for the reboot to complete (which has never happened on previous updates).
Anyone else experiencing the same or otherwise have any suggestions? is this particular update supposed to take this long to be applied?
EDIT - of course now it decides to update fine after over an hour of trying and then making a public muppet of myself which such a noob question.... carry on...
vlad335
New Head-Fier
- Joined
- Sep 28, 2015
- Posts
- 13
- Likes
- 15
No, two 3pin XLR's on the rear of the unit. https://drop.com/buy/drop-smsl-ho150xYou make your own, but, you will need some soldering skills and kit for this, nothing fancy, just basic soldering tools and a bit of practice if you have none.
Depending on your budget, get an USB-C soldering iron like the Miniware TS80P or something more fancy like a soldering station, some flux, leaded tin and most important don't breathe in the fumes.
Alternative, find someone to make the cable for you, many Aliexpress stores take custom orders.
Is your XLR input 4-pin?
Oh boy, my soldering skills are nil. I have a friend who is real good at it, though. Any link to plans on how to wire this up? Bill of materials, etc.
Really appreciate the help and quick reply!
kalibri
100+ Head-Fier
3 pin XLR may not be balanced, so triple check your amp specs before you do anything (or, if it's double XLR I may be wrong).No, two 3pin XLR's on the rear of the unit. https://drop.com/buy/drop-smsl-ho150x
Oh boy, my soldering skills are nil. I have a friend who is real good at it, though. Any link to plans on how to wire this up? Bill of materials, etc.
Really appreciate the help and quick reply!
In terms of BOM you would need:
- 2.5mm connector
- 4 wires or 4-wire cable of your preferred length
- XLR connector (or 2 x XLR if the amp has double XLR input)
CactusPete23
1000+ Head-Fier
Not an XLR expert, but a quick search found these on ebay... https://www.ebay.com/itm/175486014132 And this https://www.ebay.com/itm/276358419200.No, two 3pin XLR's on the rear of the unit. https://drop.com/buy/drop-smsl-ho150x
Oh boy, my soldering skills are nil. I have a friend who is real good at it, though. Any link to plans on how to wire this up? Bill of materials, etc.
Really appreciate the help and quick reply!
I would guess that one of these might work?
Users who are viewing this thread
Total: 20 (members: 1, guests: 19)