Shroker
100+ Head-Fier
- Joined
- Apr 16, 2011
- Posts
- 103
- Likes
- 11
I use mine wth my ATH-ESW9A and B&W P5s and I love it. LOD out to it helps with the sound stage and response in the range in general. It is nice
I just got a FiiO E11 and also dusted off my PA2V2 (that I got nearly 9 years ago!). I decided to take some photos, and I will post some more thoughts and comparisons once I have done a bit more listening on both.
First here are some photos of the FiiO E11. I got the package on Amazon that includes a spare battery and charger.
Comes in a nice metal tin with two rubber bands, USB charging cable, and 90 deg 3.5mm cable.
Back side shows off the "Kilimanjaro" name.
The right side has Gain (H and L) and EQ (0, 1, 2).
The volume knob also acts as power on/off and is mostly covered to prevent accidental volume changes.
The top has a power light and charging light. The mini USB charging port is on the side.
The bottom cover is removed to expose the battery. The cover is made of very thin metal.
The battery can be removed to expose a High/Low Power switch.
The body of the E11 is molded plastic.
Another shot of the back side.
Size comparison vs. the Moto X.
Size comparison vs. the Moto X and Beyerdynamic DT770 PRO.
Size comparison vs. Shure SE215.
FiiO E11, Moto X, and Shure SE215.
Here are some photos of the PA2V2. Mine was the first one with a clear faceplate
Front view. Clear faceplate. Blue LED.
Rear 3/4 view.
PA2V2 opened up.
Inside the PA2V2.
Front 3/4 view inside the PA2V2.
Underside of the PA2V2 circuit board.
Top of the PA2V2 circuit board.
Here are the side by side shots of the FiiO E11 and PA2V2.
PA2V2, MotoX, FiiO E11, and Shure SE215.
PA2V2, FiiO E11, and Beyerdynamic DT770 PRO.
3/4 view of PA2V2 and FiiO E11.
Front view of PA2V2 and FiiO E11.
Would be worth to buy it to use with a Superlux HD681 EVO. Would I probably see some difference with this low impedance headphone?
Thx.