Todd
Headphone Vinyl Meister
Member of the Trade: TTVJ Audio
- Joined
- Jun 21, 2001
- Posts
- 2,033
- Likes
- 846
Hi All,
The new Luxman P1u should start shipping in a few short weeks. We have put it up on our site for preorder. here is what whe have for info at this time...
The new, long awaited headphone amp from Luxman. The successor to the P!, the P1u is everything that you have been waiting for!
LUXMAN is proud to release the P-1u; Pure Class A headphone amplifier, its the successor to the highly regarded,
reference model P-1 which has been in continuous production since 2002.
The P-1u has been equipped with LUXMAN's noise & distortion cancelling circuitry (ODNF) sporting the latest version 3.0,
after reviewing the headphone amplifiers functionality, we endeavoured to maintain the P-1's philosophy - that the output
quality level of the headphone amplifiers should be similar to that of our finest separate amplifiers.
Luxman has long championed Pure Class A because we believe that it can deliver an involving natural & musical tone.
We also optimized gain to respond to various types of headphones, installed a regulated power transformer and improved
both noise and distortion performance by reviewing components to optimise their sound quality. Integration of a line
throughput with an ON/OFF selection has improved convenience . The P-1u 'ultimate' headphone amplifier will allow you
to realise the potential of the finest headphones and enjoy music to its fullest, for many years to come.
* ODNF is an abbreviation for “Only Distortion Negative Feedback” that is LUXMAN’s original high sound quality amplifying feedback circuit.
Continuous power output
2 W + 2 W/8Ω, 1 W + 1 W/16Ω, 500 mW + 500 mW/32Ω, 27 mW + 27 mW/600Ω
Input sensitivity/input impedance
Unbalance: 1.0 V/26 kΩ, balance: 1.0 V/67 kΩ
Total harmonic distortion rate
0.0025% (1 kHz), 0.02% (20 Hz–20 kHz)
Frequency response
20 Hz–20 kHz (+0, -0.1 dB), 5 Hz–170 kHz (+0, -3.0 dB)
S/N ratio
115 dB (IHF-A)
Input/output
Input: 1 x unbalanced line and 1 x balanced line, Output: 2 x standard jacks with di. 6.3 and 1 x through output
Attached equipment
Front: power switch, volume, input selection, and through output ON/OFF, Rear: balanced phase selection and AC inlet
Dimensions (WxHxD), and weight
17."(440) x 3 ( 82) x 15 " (408 mm) and 18 lbs )(8.3kg) nett.
The new Luxman P1u should start shipping in a few short weeks. We have put it up on our site for preorder. here is what whe have for info at this time...
The new, long awaited headphone amp from Luxman. The successor to the P!, the P1u is everything that you have been waiting for!
LUXMAN is proud to release the P-1u; Pure Class A headphone amplifier, its the successor to the highly regarded,
reference model P-1 which has been in continuous production since 2002.
The P-1u has been equipped with LUXMAN's noise & distortion cancelling circuitry (ODNF) sporting the latest version 3.0,
after reviewing the headphone amplifiers functionality, we endeavoured to maintain the P-1's philosophy - that the output
quality level of the headphone amplifiers should be similar to that of our finest separate amplifiers.
Luxman has long championed Pure Class A because we believe that it can deliver an involving natural & musical tone.
We also optimized gain to respond to various types of headphones, installed a regulated power transformer and improved
both noise and distortion performance by reviewing components to optimise their sound quality. Integration of a line
throughput with an ON/OFF selection has improved convenience . The P-1u 'ultimate' headphone amplifier will allow you
to realise the potential of the finest headphones and enjoy music to its fullest, for many years to come.
* ODNF is an abbreviation for “Only Distortion Negative Feedback” that is LUXMAN’s original high sound quality amplifying feedback circuit.
Continuous power output
2 W + 2 W/8Ω, 1 W + 1 W/16Ω, 500 mW + 500 mW/32Ω, 27 mW + 27 mW/600Ω
Input sensitivity/input impedance
Unbalance: 1.0 V/26 kΩ, balance: 1.0 V/67 kΩ
Total harmonic distortion rate
0.0025% (1 kHz), 0.02% (20 Hz–20 kHz)
Frequency response
20 Hz–20 kHz (+0, -0.1 dB), 5 Hz–170 kHz (+0, -3.0 dB)
S/N ratio
115 dB (IHF-A)
Input/output
Input: 1 x unbalanced line and 1 x balanced line, Output: 2 x standard jacks with di. 6.3 and 1 x through output
Attached equipment
Front: power switch, volume, input selection, and through output ON/OFF, Rear: balanced phase selection and AC inlet
Dimensions (WxHxD), and weight
17."(440) x 3 ( 82) x 15 " (408 mm) and 18 lbs )(8.3kg) nett.