Wnt2bsleepin
New Head-Fier
- Joined
- Mar 10, 2014
- Posts
- 3
- Likes
- 0
Hello All,
I was re-soldering the wires for my headphones and now one of the speakers does not work. I have tested the continuity for the wires, but the speaker seems to have failed. I was wondering if there was anyway to pry the actual speaker from the housing to see if I possibly messed up a solder joint somewhere from applying too much heat.
Here is the can I am talking about. It looks like I messed up the contacts, but I am not too sure where they connect to the speaker.
Thank you for any help.
I was re-soldering the wires for my headphones and now one of the speakers does not work. I have tested the continuity for the wires, but the speaker seems to have failed. I was wondering if there was anyway to pry the actual speaker from the housing to see if I possibly messed up a solder joint somewhere from applying too much heat.
Here is the can I am talking about. It looks like I messed up the contacts, but I am not too sure where they connect to the speaker.
Thank you for any help.