[bluzeboy]

is anyway you can post the presets of this wizard? 37904/foobar2000.v1.2.2.Dolby.Headphone-RPGWiZaRD/foobar2000.v1.2.2.Dolby.Headphone.%28Forward%29-RPGWiZaRD.fbcp
 
the links on the front doesn't work

 

[tbritton]

  is anyway you can post the presets of this wizard? 37904/foobar2000.v1.2.2.Dolby.Headphone-RPGWiZaRD/foobar2000.v1.2.2.Dolby.Headphone.%28Forward%29-RPGWiZaRD.fbcp
 
the links on the front doesn't work

Heh - you just missed this two posts back.
 
Say a big thank you to @bettergenes!
 
http://www.head-fi.org/t/555263/foobar2000-dolby-headphone-config-comment-discuss/810#post_12646492
 
Terry

 

[bluzeboy]

im looking or the presets the RPGWiZaRD.fbcp the Equalizer settings presets

 

[tbritton]

I understand. That download includes all of the presets. I hope that works for you. Is there a reason you only want the presets file? One can export them from holding shift and clicking the menu item, "Playback" and then a hidden menu appears, "DSP Chain Serializer" which you can then load from the same menu into more recent versions of Foobar2000. You need to do this separately for each of the setups, exporting them one at a time after loading each in the DSP settings dialog. Be sure to reset the page there between loading setups, as it can crash if you try to just switch between neutral/laid-back/forward.
 
Terry

 

[bluzeboy]

ok thanks i think just look for the .fbcp file
thanks again

 

[tbritton]

  ok thanks i think just look for the .fbcp file
thanks again

Here they are for you, as I recently extracted them myself on a different machine. (I went and got the copies.) You will still need all the plugins - two VST ones. Those are all included in that download link I sent you. I hope this is what you needed.
 
 

 

[RPGWiZaRD]

I should update the initial post yea. The links stopped working since £@€9! mediafire deleted my account.

I don't personally use this config so often anymore mostly due the fact I almost only listen to hardstyle these days and for that genre which is typically brickwalled to the max masters and not so much focused in audio quality it doesn't offer so much, in fact I feel the "attack"/impact of the beats is often sliiiiiiightly bit reduced mostly due the nature of EDM masterings + added reverb which is bad for hardstyle kick as it makes it less tight.

But I still enjoy using it for other genres but I almost 99% listen to hardstyle being the leading youtube hardstyle promoter by subscribe amount so it keeps me pretty busy. Will look into updating this thread in the weekend possibly.

 

[bettergenes]

Hey, RPGWiZaRD
 
Could you please update the latest Foobar2000 with your tweaks?
Many thanks for your wonderful job.
 
 

 

[RPGWiZaRD]

I'm both busy and lazy to update it at the same time but I will try to update it but I wanted to make a quick new recording with the neutral preset, which had the slightest possible adjustment to it but I really like how it sounds and found this pretty old overplayed song apparently really works superb with it that has really unnexciting instrument separation and soundstaging without the dolby headphone config:

Adele - Rolling In The Deep (Dolby Headphone - Neutral preset)
https://clyp.it/cdc0rvxm
(stream only as it's against rules to provide a download link for copyrighted material and clyp.it has probably the best quality for that as it sounds as if they don't compress the uploaded material

 

[RPGWiZaRD]

OK here's a link to a preconfigured "Neutral" preset. As usual it comes with the forward and laid-back configs as well and you can check the OP to see how to switch between them:
 
Portable preconfigured foobar2000 install in otherwise factory state:
foobar2000 v1.3.13 Dolby Headphone (Neutral)

Or if you prefer to load the config to your current foobar2000 setup using the DSP chain serializer plugin (check first post how to do that): 
 
foobar2000 v1.3.13 Dolby Headphone (Neutral) .fbcp
foobar2000 v1.3.13 Dolby Headphone (Forward) .fbcp
foobar2000 v1.3.13 Dolby Headphone (Laid-back) .fbcp

The opening post should be updated at some point but I'm too lazy for it right now at least. As usual it's a full portable install foobar2000 with only the plugins included that this config is utilizing besides the standard ones and foobar2000 in a factory default state. You might have to manually load the dolbyhph.dll file even though I have checked the box to ignore the foobar2000 dir's install path, if the volume is rather low then the dolbyhph.dll is probably not loaded.

 

[bettergenes]

Thanks a lot. The update is much appreciated!

 

[Morkai]

As much as i liked this config for my open headphones, it ruined the sound of my (closed) meze 99. I think since those have a very forward presentation, they don't benefit at all from the improved spacialisation. 
However, i very much liked the laid-back config with the DT990 premium. 

Do try it ! 

Thanks to rpgwiezard for that very interesting config.

 

[jared basshead]

Can anyone help me with dsp chain serialization? The whole hydrogenaudio site is down. Im just want to load the fbpc files!!

Thanks

 

[jared basshead]

And of course thanks for the amazing work #RPGWiZaRD

 

[Morkai]

Can anyone help me with dsp chain serialization? The whole hydrogenaudio site is down. Im just want to load the fbpc files!!

Thanks

 



Quote:

  OK here's a link to a preconfigured "Neutral" preset. As usual it comes with the forward and laid-back configs as well and you can check the OP to see how to switch between them:
 
Portable preconfigured foobar2000 install in otherwise factory state:
foobar2000 v1.3.13 Dolby Headphone (Neutral)

Or if you prefer to load the config to your current foobar2000 setup using the DSP chain serializer plugin (check first post how to do that): 
 
foobar2000 v1.3.13 Dolby Headphone (Neutral) .fbcp
foobar2000 v1.3.13 Dolby Headphone (Forward) .fbcp
foobar2000 v1.3.13 Dolby Headphone (Laid-back) .fbcp

The opening post should be updated at some point but I'm too lazy for it right now at least. As usual it's a full portable install foobar2000 with only the plugins included that this config is utilizing besides the standard ones and foobar2000 in a factory default state. You might have to manually load the dolbyhph.dll file even though I have checked the box to ignore the foobar2000 dir's install path, if the volume is rather low then the dolbyhph.dll is probably not loaded.