[OCC7N]

In the search for headphone stand and discussion with @bagwell359 I am inspired to share this small project that only need 6 screws(2 hp hangers).

I am awaiting the hangers, when I get them I will start/finish.

Any ideas for lighting/led is appreciated

 

[msing539]

It'll be nice! If you're going to keep the cover, I'd mount battery LEDs there so they're not visible.

Otherwise, you can do light bars or partial strips in the back with the diffuser covers cut to fit, and drill a small hole to run the wire.

 

[OCC7N]

It'll be nice! If you're going to keep the cover, I'd mount battery LEDs there so they're not visible.

Otherwise, you can do light bars or partial strips in the back with the diffuser covers cut to fit, and drill a small hole to run the wire.

Actually there are holes on each side/corner

The battery thing sounds interesting. Im looking for something just on and off switch, no wireless tech or nothing

 

[msing539]

Some have a remote control vs. app. I find those to work better personally and I don't need an LED strip on my network.

 

[OCC7N]

It'll be nice! If you're going to keep the cover, I'd mount battery LEDs there so they're not visible.

Otherwise, you can do light bars or partial strips in the back with the diffuser covers cut to fit, and drill a small hole to run the wire.

 

[msing539]

Nice--suggestions, if you don't want to see the individual LEDs, they sell diffusers. Not saying it has to be this one but just an idea:

https://www.amazon.com/HAMRVL-Aluminum-Diffuser-Mounting-Accessories/dp/B08V4DW1S3

And some way to run the wire so it's snug against the edge. I'd say double sided tape would work but it will pick up dust over time.

 

[OCC7N]

link is not working....and I hate seeing the LEDs

 

[msing539]

link is not working....and I hate seeing the LEDs

On Amazon, look up LED light diffuser channel. Pick one that you can cut easily.

 

[gimmeheadroom]

In the search for headphone stand and discussion with @bagwell359 I am inspired to share this small project that only need 6 screws(2 hp hangers).

I am awaiting the hangers, when I get them I will start/finish.

Any ideas for lighting/led is appreciated

Check thomann.de for some better headphone brackets

 

[OCC7N]

Check thomann.de for some better headphone brackets

I cant seem to find those where I can hang the headphones by the metal. Thats why I ordered these actually. Not gonna hang them by the strap

But thomann does have some good ones.

 

[OCC7N]

On Amazon, look up LED light diffuser channel. Pick one that you can cut easily.

Yes to that!...thats a first thought, everytime I see a LED Thanks!

 

[gimmeheadroom]

I cant seem to find those where I can hang the headphones by the metal. Thats why I ordered these actually. Not gonna hang them by the strap

But thomann does have some good ones.

Wait what?

https://www.thomann.de/intl/search_...=pra&sw=headphone stand&cme=false&filter=true

 

[OCC7N]

Wait what?

https://www.thomann.de/intl/search_dir.html?smcs=29f0a3_2417&oa=pra&sw=headphone stand&cme=false&filter=true

Thats right those are good options, but the backwall of the cabinet is 3mm thick, therefor it needs to be mounted at top.

I have this from thoman also but hangs to low. The kabinet is not that big
https://www.thomann.de/intl/km_16330_headphone_holder.htm

 

[gimmeheadroom]

If you can't use local hardware like K&M and Gravity, I think you need to go back to the drawing board on your official design

 

[OCC7N]

True! just wait and see this project is going to be just perfect. But I do need a good headphone stand at the table when I listen at the desk.

Woo Audio hps(from a polish) its a little expensive imo.