The review needs to mention the amplifier’s output power rating for SE and balanced. Or, are we to assume our IEM/Hp sensitivities need exceed 102db?

I’m interested in knowing more about the W2’s equalization curves (not the SDF profiles). There is certainly much to find here regarding equalization, but I’m interested specifically in how the entire frequency response is affected (i.e., graphs). I’ve seen them referenced somewhere, but I’m...

Problems with USB transmission coming from outside influences aren’t unheard of, but neither are they everywhere…

Unfortunately, those links aren’t working for me…

I’ll bet whoever “some say” is, they didn’t tell you exactly what to look for in a USB cable to improve sound quality. Personally, I choose USB cables based on length and build quality, and in the small chance it might improve the signal, shielding is not expensive…

Mine are the 250 ohm version of the DT-770s, but relative to the 770 punchy bass and well defined mids, and without lower bass encroachment into vocals, I believe the SRH-1540 will be a disappointment. The treble for both is comparable, and while we all have our particular preferences, I find...

Like I said above, I removed the cable… only the drivers in my ears… same problem. How can it be the cable? Edit : I also disagree with all monitors do this. The seal by my Senn Sports provide the same isolation with the same size ear tips, and work without any micro-acoustic problems at all...

I wanted to listen my IE 600s during my exercise walks, but because of mictro-acoutic problems the music was difficult to enjoy because of every footfall. Reports blamed the stock cable, so I purchased a cable recommended by Mark Ryan. I could still hear ever footfall. Wondering if it was...

Thanks! I had one more OTG cable to try, and it worked… So far, I’ve gone thru 2 OTG cables, one of the being the lightning-to-USBC that came with my W2. Never expected…

My L&P W2 is no longer working with my iPhone or iPad, while it does work with my LG G8. Did the iOS 16.5 iOS update break all OTG cables? It was reported it only broke the Apple camera adapter(?) Anyone found a remedy? Is Apple going to fix this?

I have succeeded in updating my W2-131 to the new firmware. Whereas I normally wouldn’t have because all was fine, I did want the IE600 SDF. Primarily, I’m detecting the lift in mid-bass, and currently listening to several sources for deciding when and with what I might want to engage it. I...

You must not have noticed that Shure described the SRH1540’s bass as “warm”, which it very definitely is…

Personally, I’ve never seen any suggestion by Shure that the SRH1540s were to be used for studio work. They are tuned very differently from the SRH940s, which are labeled by Shure for studio work.

To my own listening, the SRH1540s have more bass in the region 150-300Htz, and the DT-770s (250ohm) provide more extended bass in the region 20-150Htz. I would rate the Shures as warmer.

Your app is intended for more important applications, of course, but I can also imagine in its data being an aid, together with PEQ, for matching our cans and IEMs to our own hearing(?)