[decayed.cell]

Quote:

Originally Posted by Joshatdot /img/forum/go_quote.gif I want to perform this mod, so I just replace the caps with same values of the ones circled in Doc's reply? I counted on my AV-710: 21 x 10uF 10v caps (2.5mm lead spacing?) 3 x 10uF 25v caps (2.5mm lead spacing?) 4 x 220uF 10v caps (3.5mm lead spacing?)

Pretty much but only the ones circled not sure about spacing

 

[mono]

After I replaced these caps on mine I found no improvement except from the coupling caps on the analog output. YMMV, but personally I feel there isn't much point to the other cap replacements. I've two of these cards and replaced the coupling on both but only the rest of the caps on one.

 

[Joshatdot]

Quote:

Originally Posted by mono /img/forum/go_quote.gif After I replaced these caps on mine I found no improvement except from the coupling caps on the analog output. YMMV, but personally I feel there isn't much point to the other cap replacements. I've two of these cards and replaced the coupling on both but only the rest of the caps on one.

Just the green ones replaced, coupling caps?

 

[mono]

That looks right but if you might ever make use of the other channels / I/O, those too might have their caps replaced.

 

[Joshatdot]

ok, so 10uF 10v caps should be fine, or higher uF's?