Seems on first use to connect with Poly way faster that the old version. Great news.

Just updated successfully. For me it has fixed the issue when Poly disconnects from the wifi and then the mpd server crashes on reconnecting. I've walked up and down the garden, heard the clicks as poly disconnected and then reconnected. No crashes. Thanks Mat.

I'm finding the same. Finally I can take Poly to bed with me...

Android users: before the update I found that bubble upnp would cut the first half second (or less) off every new track. MPD didn't, so I used MALP to control poly. With the new firmware (which seems to use an MPD upnp hybrid) I was finding the problem occurred with both apps. So I fiddled a...

I'm having a completely repeatable issue which is new to me with the firmware update. It happened as I was walking up and down the garden with a wheelbarrow listening to Poly via MALPD (though the same thing happens with playlists via GoFigure). I hear a click as Poly loses the connection to the...

Matt has helpfully responded to me when I was having the same problem. You need to delete Poly from the list of Bluetooth devices on your phone to solve the problem. So unpair to pair. It worked for me though connecting via Android requires patience and in my experience repeated restarts of the app.

Yes. I've had that one. Looks like you're using Android. The only solution I've found is to kill the app and attempt to reconnect. I am finding that the connection process often stalls or produces the message you've seen. It often takes 3 or more tries and each attempt to connect can take 3 or...

Maybe I was a bit hasty. Maybe my frustration is historic. But even when GoFigure connects there are still odd things going on, like Poly's firmware being reported as 0.0.0 and the size of the 400gb SD card being underreported... In Android 9 the back button also seems not to close the app. It...

Thanks very much. That works. I hope other users grasp this further counterintuitive aspect of Poly : that to pair it you have to unpair it.

Just a warning to android users. John Franks has unhelpfully said that 'old' or 'cheap' devices may not work with the new GoFigure. I have updated to firmware 2.0. It works on my wife's ipad. But on both an old tablet running android 6 and on a moto g6 running android 9 the new app stalls and...

I use qobuz in the UK on Android with poly. Works perfectly with Bubble upnp. I don't subscribe to the high res streaming version of qobuz though. I tend to stream CD quality to try things out then if I like it I buy it in high res. The great thing with qobuz is that you can buy the high res...

I think you need to use the config pin and scroll through the options the nice lady will give you. The last one is factory reset. Activate that. Once it has reset you need to use the pin again to restart in access mode and connect to its hotspot. Using the pin is fiddly but welcome to poly.

I can connect on both an android 8 phone and an android 6 tablet. I don't accept any Bluetooth connection but generally I have to kill the app at least once before it connects. Bluetooth has to be on on your device before you start. Even then Gofigure can hang on the Polys Near You Screen. It...

I think I've worked out why my poly was renamed BlueZ 5.43 on the connection screen with the android beta Gofigure. I had renamed it 'Colly's Poly' (I know I know, but this is supposed to be fun) in the setup process and I suspect Gofigure did not like the non alphanumeric character in the name...

It defaults to that and so no need to tinker.

I use Bubble upnp to stream qobuz to Poly. Works a treat. (Android only)

It shouldn't be too hard. The trick is to make sure you know Poly's present ip address. You then go to Profiles on MALP's menu. Press + to create a new one. Give it a sensible name. Add the IP address and save. After a second or two it should connect. It's much easier to use MALP if you can tell...

That makes a lot of sense. I'm not a programmer and I'm sure you're right. But to a non-expert eye it does look as though quite a bit has changed with Bluetooth LE since the version that's on Poly. I'm just struggling to understand why Gofigure beta takes so long to connect - - and for me on...

The strange BlueZ 5.43 renaming of Poly is a bit of a give away. It strongly suggests that Poly does not use the latest version of the Linux Bluetooth communication stack. Over at http://www.bluez.org it gives details of several significant updates since version 5.43, which dates from October...

I've stuck by Chord's request not to post about the Android Beta on forums up to this point, but because that undertaking seems not to be generally followed here I might say I have exactly the same BlueZ 5.43 misnaming of Poly as vkvedam with Android 6 and 8. Not a big problem but odd. People...

This is a report on my stupidity, but it might help others. In places where I can't get a wifi signal I have been connecting my android tablet to Poly in hotspot mode and using Bubble upnp. That's frustrating because for some reason Bubble cuts off the first half second of every track. When I...

Hoovering the house streaming from qobuz to Poly. Give the girl some love. She sounds wonderful. Waiting for the GoHoover app so I can sit down while she gets on with it.

Like others I've had good results with Bubble UPnP, though also like others I do seem to lose the first little bit of each track (with Bubble Mojo seems to assume that the bitrate will change between each track, so flashes red for an instant; I'm guessing that is where the lost bits go). Using...