Search results for query: *
- Users: kjetinho
- Order by date
-
SOHA II Builders Thread
The leds are bling. You can light the tubes and have a pover on led, or let it be.. Yes, freestyle the rear as the sockets are not pcb-mount components,- kjetinho
- Post #1,193
- Forum: DIY (Do-It-Yourself) Discussions
-
SOHA II Builders Thread
I use paste, and the sinks gets quite hot, but I'm not sure if you have to use it. From one thing to another. I now run my amp on a 500mA fuse, everything seems to be ok.- kjetinho
- Post #1,191
- Forum: DIY (Do-It-Yourself) Discussions
-
SOHA II Builders Thread
I desoldered the C5P, and measured the regulator and C5P again. No shortage. Must have been a solder bridge I could not see. I put C5P on the print again, and there was no short. Thanks for the advice!- kjetinho
- Post #1,189
- Forum: DIY (Do-It-Yourself) Discussions
-
SOHA II Builders Thread
Ok. Ifound a short on both legs of C5P. Is this damadged, maybe?- kjetinho
- Post #1,188
- Forum: DIY (Do-It-Yourself) Discussions
-
SOHA II Builders Thread
Quote: Originally Posted by regal Where the heatsink is soldered to the board, make sure it is an open circuit with the DMM , also make sure that the ground trace is an open circuit to the regulator output. Edit: better explaination on power rails: put your DMM pos lead on the TB+...- kjetinho
- Post #1,186
- Forum: DIY (Do-It-Yourself) Discussions
-
SOHA II Builders Thread
200$ for standard version with cabinet and tubes and all parts. Without volume knob- kjetinho
- Post #1,185
- Forum: DIY (Do-It-Yourself) Discussions
-
SOHA II Builders Thread
Thanks! I didn't know that the heatsinks should be soldered to the board. Could this be the problem? I will check the ground trace when I get the time come sunday evening.- kjetinho
- Post #1,182
- Forum: DIY (Do-It-Yourself) Discussions
-
SOHA II Builders Thread
Thanks a lot. I think I will wax the birch plywood for better finish, and I might try to build a second wooden part for the cabinet later in a darker harder wood, to see how that will look.- kjetinho
- Post #1,180
- Forum: DIY (Do-It-Yourself) Discussions
-
SOHA II Builders Thread
Quote: Originally Posted by regal Did you use bigger caps anywhere? If not make sure your heatsinks are insulated. It could be an indication of a small short. There have been reports of the ground plane extending too far into the PS rails on the PCB. I've used Mundorf ZN 0,22 uF...- kjetinho
- Post #1,178
- Forum: DIY (Do-It-Yourself) Discussions
-
SOHA II Builders Thread
Hi I've nearly finished my first build, the SOHA II. I've been testing it for hours, and think it sounds great. One problem thogh. The fuse blows when I turn on the power. Now I'm running it with 630mA fuse instead of 500mA that came with the kit. Is this ok? Some picktures: Nearly...- kjetinho
- Post #1,176
- Forum: DIY (Do-It-Yourself) Discussions
-
Recommended headphones for SOHA II
Hi I've just finished building a SOHA II head-amp. I'm new to head-fi, so I'm wondering which phones people use on the SOHA II, and which I should steer clear of? Thanks in advance- kjetinho
- Thread
- Replies: 1
- Forum: Headphones (full-size)