Separate names with a comma.
That's because SWFK doesn't have any mids. It peaks at around 4.5kHz
Correction - Second resonator shifted peaks DOWN around -300Hz...
Are there any good alternatives to ARTA + LIMP?
Type-III damping means no bass
So this would work well as a tweeter
Just like Dhruv said, 4.6 vs 4.7uF doesn't impact sound as much as resistance
To my ears:
39ohms sound dark
41 ohms sounds a bit relaxed
I tried 39ohm, it's a bit too damped for my taste. I'm currently using 43ohm because I like my highs a bit sharper
PSA: Knowles vs Bellsing CI-22955
Bellsing has 2-3dB less bass; mids and highs are similar in level, but different peaks
Because of this Bellsing...
Kind of yes and kind of no.
Knowles will make it if you can order 100pc or more
We are on an audiophile forum, that's why I burn-in my litz wires for at least 300hours before I build anything :beerchug:
Sorry if I went a little overboard, I got a wrong impression that @dhruvmeena96 didn't understand such a basic thing.
IMO such things are...
That's what I'm on about! It does not matter!
Zobel will affect both drivers even if you place it in the middle of the wires because both + and -...
And this is how I would solder it for 2-pin
Do you really not understand this?
Problem with zobel is that if there is nothing before it (like a resistor or a cap) - it defacto affects all drivers
Bass and mids seem alright to me. The only change was brightness.
I'm not sure if adding another fullrange here is wise, I already feel there's...
Tried this with GQ-30710 and no grey damper.
It was pretty good but a bit bright and shouty, so I changed the resistor to 33ohms for more damping...
Ripole/dipole presumes open baffle design.
Since DDs backwaves are isolated from the sound outlet it's just sealed push-pull or push-push for IEMs
Does anybody know part# of these ported DTECs? Or maybe Sonion?
L-pad is series before shunt, why do you have shunt before series?
GQ-30783 is a good starting point - simple double with 1 sound outlet = only 1 tube to worry about.
White/brown damper for neutral,...
Same principle as line array speakers. Would love to see your results!
Savant is neutral-ish mild V. But you can make it warmer by using higher Ohm resisor and/or red/orange damper on ED29689.
38AM007 looks like HODVTEC alternative so you'd want to cross it over quite low, below 200Hz (subwoofer duty)
SWFK is a super tweeter so crossover...
Adding resistors to BA increases decay rate (mostly in lows), plus adding dampers (green and up) makes them sound less articulate/precise
Broke my first TWFK today.
Turns out TWFK-30017 is a combo of FK-30018 and WBFK-30019.
Who knows, maybe this will be helpful to someone.