DIP8 to SO8 Adapter (p/n 031101B)

yes. the op amps are in the analog circuit.

Quote: Originally Posted by fab_flix I tried replacing the opamps. But on the front I've put the one that was on the line in and the other channels are opamp-less. That's the way it is now and still the sound sucks. Is there the possibility that all opamps were gone during the modding...

1) i'm not sure how the circuit in the x-fi is, but on my audigy 2, when the front opamp was removed, there was still sound, just very faint. it had not been amplified, though the fact that sound is present means the circuit was still complete somehow. on the x-fi, removing the opamp may leave...

could be multiple things. it could be the transformer, but since the humming is intermittent i would bet against it. my bet is that the humming isn't even coming from the amp, rather something around it or the mains circuit it's on. do you have any magnetic or wireless devices in close...

Quote: Originally Posted by zer061zer0 Well I am still here and I am thinking of suing the head amp as a preamp. have gotten some holand musicaps for the job, let's just see when's the time to do so. i have mine running as an amp and a preamp. as a preamp, it made my crappy...

1) capacitors and resistors are pretty hardy in regards to soldering. the sensitive components are usually ICs and/or transistors. 2) to measure DC offset, turn on your source and amp, let them warm up, and play sound/music through them. set your multimeter to DC and put the positive on the...

Quote: Originally Posted by buzztiger Which is the power cap on a xfi titanium fatality ? Is it the one as posted previously (previous page)? It looks so small to be a power cap. pci-express uses much cleaner power than pci, so not such a large capacitance is needed to smooth out...

Quote: Originally Posted by wfarid oh ok, i just wanted to change them so I don't get exploding caps. I had another one of the same card and one of the caps had gone bust. But I guess I'd have to change ALL of the caps if I wanted to avoid that. Now would changing the op-amps on the...

Quote: Originally Posted by wfarid thanks random! Now if I changed that power cap, should I then change the Vreg as well? if you feel so inclined, yes, but they're both in the digital part of the circuit and changing them will have little to no effect on the sound. that is...

Quote: Originally Posted by wfarid haha, the first ops nubmers are; 4556a J009h JRC and then the other 3 ops are: 4558C (st logo) ez831 both are pin-for-pin compatible with lm4562.

Quote: Originally Posted by wfarid I have the PCI-E Fatal1ty Titanium Soundcard and i can't find the power cap. I'm assuming that I can just switch out all the op-amps with the lm4652s without problems. I attached a picture. never assume anything, young padawan. to be sure, give...

Quote: Originally Posted by RallyMaster I just A/B'd the opamp change with my friend's modded LM4652 X-Fi XtremeMusic (no other mods) and my bone-stock XtremeMusic. I am seriously not hearing a difference and neither is he. Maybe I need some higher priced cans or some high end speakers...

Quote: Originally Posted by 1117 I guess it is safe to say this one is a no-go, as I see no interest. Well, whenever anyone in Florida is up for a mini0meet, let me know. I'm always available. there's interest, just not enough for an actual meet.

Quote: Originally Posted by ericj In case anyone wonders, yes, a week on a bowling ball does take the clamp out of an ATH-1. Good sounding when damped with dense felt, but oddly less sensitive than 32ohm SFIs. on the topic of the 32 ohm sfi drivers, does anybody else need a...

18th is the only day i can do it. obviously i don't want to be the only one that influences the decision, so if the 18th isn't good for other people, speak up!

Quote: Originally Posted by raffy Nice! BTW, you're still bringing your neighbor right? Just want to get a somewhat accurate headcount. yes, he will be attending with me.

sweet. i'll have another pair of 'phones in time for the meet, a pair of 80's vintage stantons.

Quote: Originally Posted by mrarroyo April 25th! 18th...

Quote: Originally Posted by wualta Orthos, like Esau, are hairy. 'Stats are smooth.

you guys(and gals?) post too damn much!

just ordered the motherboard for my new pc. it will be put together next week and will be attending this meet with me.

Quote: Originally Posted by fsma Yes iQEM, 40mm driver cans are the right size baffles to seal those into. actually, i believe it is 42mm(44?). at least i know that i had to widen the 40mm baffle i had...

Quote: Originally Posted by raffy Good news guys, if the meet will indeed go push through, Jack Woo from Woo Audio is willing to send us a demo amp, either a Woo 2 or 6SE. I was impressed with the 6SE I heard last week that I decided to ask Jack if he can send us a demo unit for the...

Quote: Originally Posted by scompton I can tell you from personal experience, silver corrodes as well. My wife has bought quite a few pieces of decorative silver that I have to polish a couple of times a year. I assume that silver oxide is as bad a conductor as copper oxide. it's...