Hi guys, it’s been a while. I’ve been meaning to write a review on these for quite some time. These are just my own personal experiences, views and opinions. As usual, no freebies & no loaners. My TH-610 were burned in for around 100 hours, tested with the stock cable. Audio set up used. 16/24bit uncompressed lossless music, QED Reference optical TosLink cable, Anker powerbank, Chord Qutest, Gothic Audio 8 core pure solid Silver RCA cable with Silver-plated Tellurium Copper Aeco connecters, Violectric HPA V200, custom solid core Copper...

Hey audiophiles. Audio set up used: 16/24bit uncompressed lossless music, optical TosLink cable, Nordost Brahma power cable, Teac UD-503, custom solid core copper silver gold XLR cables, Stax SRM-006T, custom solid core copper silver gold power cable. This is a review of the Lambda Professional. These are just my impressions, opinions, views and experiences with them. I purchase all my many cans (all blind, risky but fun), no freebies or samples. Design, build & comfort. Well these use a thicker and stronger plastic than the SR-202 and...

Hey audiophiles. Audio set up used. 16/24bit uncompressed lossless music, optical TosLink cable, Linear 5 volt power supply, AudioQuest Pearl micro USB cable, Chord Qutest, custom solid core copper silver gold RCA cables, Lake People Phone-amp G109S (1ohm impedance output), custom solid core copper silver gold power cable. The Z1R is fitted with a litz copper 6.3mm jack cable. These have been burned in for at least 50 hours. These are just my impressions, opinions, views and experiences with them. I purchase all my many cans (all...

Hello all. My Clear has been burned in for 200 hours and were used balanced via 4 pin XLR. My audio connective trail and set-up: 16 and 24 bit WAV uncompressed and lossless files, optical TosLink cable, Teac UD-503, Nordost Brahma power cable, Siltech 770i Classic Anniversary Pure Silver Gold XLR cables, Violectric HPA V181 headphone amplifier, Nordost Brahma power cable. I reviewed the great Utopia, the Elear and the Elegia. So here is my take on the Clear (just the Stellia left I guess). I have expressed my views on the previously...

My Denon AH-D7200 review. Hi audiophiles. My AH-D7200 were burned in for at least 200 hours and were used balanced via 4 pin XLR. My audio connective trail and set-up: 16 and 24 bit WAV uncompressed and lossless files, optical TosLink cable, Teac UD-503, Nordost Brahma power cable, Nordost Tyr XLR cables, Violectric HPA V181 headphone amplifier, Nordost Brahma power cable. So I’ve not really had many Denon cans, I’ve had more Fostex cans. Just didn’t happen but I’m so glad and pleased I got these beauties. I have to say I really like...

Hello audiophiles. I have reviewed a few headphones here on Head Fi, including the Audeze LCD-3 pre-fazor and the LCD-X. But for some reason or another, I never got round to finishing my review of a LCD-2. I have had the fazor and classic versions previously but this is a review of the LCD-2 pre-fazor, probably revision 2. They were manufactured in October 2012 and have angled metal mini XLR connecters on the ear cups. My audio connective trail and set-up: 16 and 24 bit WAV uncompressed and lossless files, optical TosLink cable, Benchmark...

My audio set up & connective trail: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Digital optical toslink cable, Benchmark DAC1 with AMR gold-plated internal fuses connected to a custom high end power cable/Chord Qute Ex connected to a linear power supply, custom Mundorf pure solid silver & gold RCA cable, Graham Slee Solo Ultra Linear Diamond Edition with PSU1. My 80 Ohm cans have been burned in for at least 100 hours and are fitted with custom protein leather memory foam circumaural ear pads (mainly for comfort and...

Hello all. My audio connective trail and setup: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Digital optical toslink cable, Chord Qute Ex with a MCRU linear power supply, a custom 6 core pure silver litz RCA cable, Graham Slee Solo with PSU1. Mine have been burned in for about 50 hours. I’ll get the negatives out of the way first. That stock cable. It is a poor choice from Focal to include it with these stunning cans. I find it microphonic, too short and far too rigid and stiff. Seriously, what where they...

My audio connective trail and setup: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Digital optical toslink cable, Cambridge Audio DacMagic with a linear 12v AC 2000ma power supply, a custom 6 core pure silver litz RCA cable, Graham Slee Solo with PSU1, all connected to a custom Russ Andrews Yello power mains extension with a Supra gold plated UK mains plug with a AMR gold-plated 13 amp fuse inside. Hello people. These have been burned in for at least 30 hours and I plan to add updates with further listening. After...

Hi everyone. My cans have been burned in for at least 150 hours. I am pleased there is a lot of love for the T90 here on Head-Fi, it is worthy of it. These cans are light and very comfortable. The ear pads are of high quality and are easily replaceable. I think they are quite small full size open back circumaural cans and they look classy and neat. The grills/mesh look great. I’ll be trying out some leather ear pads soon, just because. Credit to Beyerdynamic for the weight, comfort and looks : ) Build quality is good but I do not like the...

My audio connective trail and setup: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Digital optical toslink cable, Gustard DAC-X10 (with a HiFi Tuning internal fuse) connected to a custom solid core silver power cable, custom pure silver XLR cable/Oyaide Neo d+ class B XLR cable, all connected to a custom Russ Andrews Yello power mains extension with a Supra gold plated UK mains plug with a gold plated AMR fuse inside. Hi guys. Maybe not many people bought this amp or maybe it was discontinued quickly and replaced by a...

My audio connective trail and setup: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Digital optical toslink cable, Gustard DAC-X10 (with a HiFi Tuning internal fuse) connected to a custom solid core silver power cable, custom pure silver XLR cable/Oyaide Neo d+ class B XLR cable, S.M.S.L SAP-10 amplifier connected to a custom SOLID CORE PURE SILVER 99.999% 5N 2MM 12 AWG power cable, all connected to a custom Russ Andrews Yello power mains extension with a Supra gold plated UK mains plug with a gold plated AMR fuse inside...

My audio connective trail and setup: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Digital optical toslink cable, Gustard DAC-X10 (with a HiFi Tuning internal fuse) connected to a custom solid core silver power cable, custom pure silver XLR cable/Oyaide Neo d+ class B XLR cable, S.M.S.L SAP-10 amplifier connected to a custom SOLID CORE PURE SILVER 99.999% 5N 2MM 12 AWG power cable, all connected to a custom Russ Andrews Yello power mains extension with a Supra gold plated UK mains plug with a gold plated AMR fuse inside...

My audio connective trail and setup: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Digital optical toslink cable, Gustard DAC-X10 (with a HiFi Tuning internal fuse) connected to a custom solid core silver power cable, custom pure silver XLR cable/Oyaide Neo d+ class B XLR cable, S.M.S.L SAP-10 amplifier connected to a custom SOLID CORE PURE SILVER 99.999% 5N 2MM 12 AWG power cable, all connected to a custom Russ Andrews Yello power mains extension with a Supra gold plated UK mains plug with a gold plated AMR fuse inside...

My audio connective trail and setup: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Digital optical toslink cable, Gustard DAC-X10 (with a HiFi Tuning internal fuse) connected to a custom solid core silver power cable, custom pure silver XLR cable/Oyaide Neo d+ class B XLR cable, S.M.S.L SAP-10 amplifier connected to a custom SOLID CORE PURE SILVER 99.999% 5N 2MM 12 AWG power cable, all connected to a custom Russ Andrews Yello power mains extension with a Supra gold plated UK mains plug with a gold plated AMR fuse inside...

My audio connective trail and setup: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Nordost Blue Heaven USB type B cable/Oyaide Neo d+ class S USB type B cable/custom Nordost USB type B cable, iFi micro iUSB purifier, Nordost Blue Heaven USB type B cable/Oyaide Neo d+ class S USB type B cable/custom Nordost USB type B cable, Fostex HP-A4BL DAC connected to a iFi iPower 12 volt power supply/HRT Music Streamer Pro DAC/Pro-Ject Pre Box S2 Digital, Nordost Heimdall RCA cable/Oyaide Neo d+ class S RCA cable, Beyerdynamic A1...

My audio connective trail and setup: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Nordost Blue Heaven USB type B cable/Oyaide Neo d+ class S USB type B cable/custom Nordost USB type B cable, iFi micro iUSB purifier, Nordost Blue Heaven USB type B cable/Oyaide Neo d+ class S USB type B cable/custom Nordost USB type B cable, Fostex HP-A4BL DAC connected to a iFi iPower 12 volt power supply/HRT Music Streamer Pro DAC/Pro-Ject Pre Box S2 Digital, Nordost Heimdall RCA cable/Oyaide Neo d+ class S RCA cable, Beyerdynamic A1...

My audio set up & connective trail: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Cambridge Audio DIG300 digital optical toslink cable, iFi iPower 12 volt 1.8 amp power supply, Fostex HP-A4BL balanced DAC and amplifier, Sennheiser CS 800 S balanced 4 pin XLR cable. Where do I begin with these cans? So much has been written about them, the "great and legendary" HD 800. So much contrasting views, opinions, reviews and articles. I might keep this one short... I think the question you must ask yourself before hearing them is: how...

My audio set up & connective trail: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Oyaide d+ class S USB Type B cable, iFi micro iUSB purifier, Furutech Formula 2 USB mini cable, Meridian Explorer 2 DAC via line out, Pure silver litz 3.5mm to RCA cable, Teac A-H01 amplifier. My amplifier is connected to a custom Nordost Heimdall 2 power cable with a IEGO pure silver IEC & a Furutech rhodium FI-UK plug with a AMR gold plated fuse inside. I’ve owned a couple of Grado headphones in the past, the SR 80i and the...

My audio set up & connective trail: 16 & 24-Bit WAV lossless files, Foobar2000 with WASAPI event output, Oyaide d+ class S USB Type B cable, iFi micro iUSB purifier, Furutech Formula 2 USB mini cable, Meridian Explorer 2 DAC, Pure silver litz 3.5mm to RCA cable, Teac A-H01 amplifier, Modded Beyerdynamic T1 headphones with internal damping. My amplifier is connected to a custom Nordost Heimdall 2 power cable with a IEGO pure silver IEC & a Furutech rhodium FI-UK plug with a AMR gold plated fuse inside. What more can I say about these brilliant...