RenEh's latest activity
-
RenEh replied to the thread Massdrop x THX AAA™ 789 Linear Amplifier - Impressions Thread.It’s smooth, but you’ll know when you’re not making proper contact in between steps. You can see photos here... -
RenEh replied to the thread Massdrop x THX AAA™ 789 Linear Amplifier - Impressions Thread.Well I’m glad you’re excited 😁I ended up removing the relay. It turns out that it is for muting the circuit when you insert things...
-
RenEh replied to the thread Massdrop x THX AAA™ 789 Linear Amplifier - Impressions Thread.I think the original isn’t d shaped but my d shaped one worked fine anyways. I’m using the original knob now all enclosed.
-
RenEh replied to the thread Massdrop x THX AAA™ 789 Linear Amplifier - Impressions Thread.I apologize if I come in strong as this amp has the ability to bring out the worst from the subjective and objective camp. What I can...
-
RenEh replied to the thread Massdrop x THX AAA™ 789 Linear Amplifier - Impressions Thread.Your question and subsequent response were so predictable that they were redundant. Next you’ll tell me your golden sample amp also has...
-
RenEh replied to the thread Massdrop x THX AAA™ 789 Linear Amplifier - Impressions Thread.The two missing caps are at the what I was told is a rail splitter. The power supply is 24V, but at the missing caps, it measures 12V...
-
RenEh replied to the thread Massdrop x THX AAA™ 789 Linear Amplifier - Impressions Thread.I already use a cheap Jameco linear PSU, and it does indeed help. I also noticed that there are two missing capacitors at 24V input that...
-
RenEh replied to the thread Massdrop x THX AAA™ 789 Linear Amplifier - Impressions Thread.Objectively, near perfect channel balance and no more scratchy pot. Subjectively, to give this amp micro dynamics. It simply has none...
-
RenEh replied to the thread Massdrop x THX AAA™ 789 Linear Amplifier - Impressions Thread.https://www.ebay.com/itm/193893086893?hash=item2d24edb6ad:g:VbgAAOSwpGFZ4gXf Imo source gear will dictate if you hear any micro...
-
RenEh replied to the thread Massdrop x THX AAA™ 789 Linear Amplifier - Impressions Thread.Unscrew the bottom screw and all the screws on the rear I/O so that the backplate comes off. After that, you can slide the front plate...
-
RenEh replied to the thread Massdrop x THX AAA™ 789 Linear Amplifier - Impressions Thread.You do it like this charactercounter
-
The biggest caps I ever fit in my BHC was the Audyn cap Q4 400V. Looks like the cap you linked is about 10mm wider in diameter. It might...
-
RenEh replied to the thread Crack;Bottlehead OTL.Does anyone know if this cap would physically fit under the crack? https://www.partsconnexion.com/CLARITY-77116.html
-
Same as the original drivers Ground on the left solder point....................I taped the back to dampen them but not blocked any of...
-
RenEh replied to the thread The "non-Grado" Driver Grado Thread.I ended up just taking a guess and made it consistent. Anyways It's going to go for 100 hours of break in. So far it seems more detailed...
