musmecca's latest activity
  • M
    musmecca replied to the thread Home-Made IEMs.
    I use this..
    • Screenshot_20240421-153539_Gallery.jpg
  • M
    musmecca replied to the thread Home-Made IEMs.
    The sound thief works...I have a pic of mine somewhere in here..
  • M
    musmecca reacted to piotrus-g's post in the thread Home-Made IEMs with Like Like.
    That because the vent releases pressure in the opposite phase. You are feeding the inverted phase signal into positive signal canceling...
  • M
    musmecca replied to the thread Home-Made IEMs.
    Thats pretty interesting. I'd thought about feeding the vent back into the main bore so it acted like a passive radiator...pretty common...
  • M
    musmecca reacted to Wgibson's post in the thread Home-Made IEMs with Like Like.
    Dip switches with 1.27mm pin spacing, aliexpress is a good source and I've been reliably getting stuff in less than 3 weeks to the US...
  • M
    musmecca replied to the thread Home-Made IEMs.
    Which switches and trim pots are you using? Every time I try to find the right ones on mouser or digikey, I end up with some giant...
  • M
    musmecca reacted to swtnate's post in the thread Home-Made IEMs with Like Like.
    I wouldnt go after deadening that high without a human ear listening. You may may wind up putting in so much extra into it that wasnt...
  • M
    musmecca reacted to Xymordos's post in the thread Home-Made IEMs with Like Like.
    Ooh I like this type of tuning. Listen to it yourself and see if you can hear it, personally I usually keep those peaks since I can't...
  • M
    musmecca reacted to Wgibson's post in the thread Home-Made IEMs with Like Like.
    For the sub I used a 38AP011GM/8a with some physical tuning, looks like a monster. I can reduce bass 4db by closing the 38AP vents, they...
  • M
    musmecca replied to the thread Home-Made IEMs.
    Just one of the new ones to check out, not every Knowles driver!
  • M
    musmecca replied to the thread Home-Made IEMs.
    I worked with Davin Moorman at Seltech...he graciously sent some samples for me to put through the paces. Their min order qty at the...
  • M
    musmecca replied to the thread Home-Made IEMs.
    Digikey has them now in singles...$39 each and in stock.
  • M
    musmecca reacted to Aldo40's post in the thread Home-Made IEMs with Like Like.
    I think you can start with a 0.39µf and then go with smaller if needed. we can eliminate the low component with an R in // to make an...
  • M
    musmecca replied to the thread Home-Made IEMs.
    Any thoughts on single HP cap value for the RDU dual super tweeter? I'd ideally like it to cut at 6-7k as it doesn't appear the RDU does...
  • M
    musmecca replied to the thread Home-Made IEMs.
    yep...that's the price for 1. Only good thing is they are not counterfeit or used!
Show older items
Back
Top