Recent content by jeanba3000
-
KOSS ESP-950 Thread
Hello and happy new year ! I own a KOSS/Drop ESP 95X and, as the Koss amp can originaly work with a simple battery pack (6x1.5V batteries), I was wondering if it could nicely work with a powerbank like this one that can deliver the 9V ? I guess voltage is ok but I was wondering if the bank...- jeanba3000
- Post #3,949
- Forum: High-end Audio Forum
-
Millett "Starving Student" hybrid amp
Yesss ! You're right ! Comparing to my previous schematic, I reversed the R3/R9 and the opposite path connexions to the IRFs- jeanba3000
- Post #7,256
- Forum: DIY (Do-It-Yourself) Discussions
-
Millett "Starving Student" hybrid amp
There is no led on my version, here is my circuit drawing and photos of both sides : It's a double sided PCB with a ground plane on one side, 10x10 cm IRFs and tube sockets are mounted on the opposite side from the components side- jeanba3000
- Post #7,254
- Forum: DIY (Do-It-Yourself) Discussions
-
Millett "Starving Student" hybrid amp
Hello everyone I'm building another SS with a slightly redesigned PCB, basicaly a little smaller, and it doesn't work, the tubes don't glow and no sound or any noise comes from the headphones : the power supply delivers 48V, I checked resistor values, shorts, I checked and rechecked my circuit...- jeanba3000
- Post #7,252
- Forum: DIY (Do-It-Yourself) Discussions
-
Millett "Starving Student" hybrid amp
Hi I had the components in a drawer since 2009, the confinement gave me some time to complete this project ! So here are some pictures of the finished product The sound is nice but not impressive due to my old Sony CD1700 headphones : lack a bit of bass and too much highs, I tried with some...- jeanba3000
- Post #7,250
- Forum: DIY (Do-It-Yourself) Discussions
-
Phonak Audeo to close down?
Well, after a few thoughts, I remembered my iPhone's headphones were still in their box, so I sacrificed them : by curiosity I cut the Apple monitors in half, the cable makes a knot inside it, so I cut the cable a little before to get a not twisted cable end dismounted the Phonak...- jeanba3000
- Post #123
- Forum: Portable Headphones, Earphones and In-Ear Monitors
-
Phonak Audeo to close down?
Hi I own PFE 112 since years, but the cable hardened during time and provoqued a bad connexion, a well known problem from first series I believe. I contacted a few days ago Phonak at this email adress : Operations.Audeoworld@phonak.com, asking how to get a replacement cable, they replied...- jeanba3000
- Post #120
- Forum: Portable Headphones, Earphones and In-Ear Monitors
-
THE DIY HEADPHONE STAND THREAD
Hi Here is my "system" on the shelf over my desk and monitors, simple, effective and costless as I already have some in stock since years :- jeanba3000
- Post #530
- Forum: DIY (Do-It-Yourself) Discussions
-
Millett "Starving Student" hybrid amp
Thanks for the answer. I will make photos and post a schematic of my SS. OK I wasn't aware that tube microphonics were such a « fatality », even if this tingling sound is beautiful in itself, I could just listen to it as I spent time listening to small bells hanging from budhist temples...- jeanba3000
- Post #2,812
- Forum: DIY (Do-It-Yourself) Discussions
-
Millett "Starving Student" hybrid amp
Hello everybody Finaly my first Starving Student is there ! It's based on the last evolution of the SS, with some changes due to the stock I had : C1-C6 : 2000 µF 50V C2-C4-C3a-C5a : 0.22 µF 100 V R14-R16 & R15-R17 : each pair replaced by a 56.2 K all resistors are metal 1%...- jeanba3000
- Post #2,810
- Forum: DIY (Do-It-Yourself) Discussions
-
Millett "Starving Student" hybrid amp
Have you tried Farnell ? Looks like they sell in Australia too…- jeanba3000
- Post #2,560
- Forum: DIY (Do-It-Yourself) Discussions
-
Millett "Starving Student" hybrid amp
Hello from Paris I usually buy my components from Farnell (they have a swedish site), Reichelt (only in german, but I manage to find what I want and order without speaking german) and Radiospares (swedish version too, in France, due to some law, they are restricted to professionnal customers...- jeanba3000
- Post #2,364
- Forum: DIY (Do-It-Yourself) Discussions
-
Millett "Starving Student" hybrid amp
Thanks for the infos Oops, good eye Dsavitsk, hum it seems I made some other mistakes… Still work to do… It seems ok now, maybe not very elegant design, but if it does work, I'm fine with it…- jeanba3000
- Post #2,154
- Forum: DIY (Do-It-Yourself) Discussions
-
The Millett Starving Student Tube Thread.
Hello I've received 10 identical tubes from TheTubeCenter, here is a picture : On the box : Pro/Comm Industrial grade electron tube Electron Tubes International Inc. On the tube : "19J6" in white near the top of the tube, in red around the tube : "CBS" "Made in USA" "DD"...- jeanba3000
- Post #31
- Forum: DIY (Do-It-Yourself) Discussions
-
Millett "Starving Student" hybrid amp
Hello everyone I'm drawing (on Adobe Illustrator) a PCB based on Millet's first schematic as shown on his site. I'd like to make the smallest circuit to insert in my preamp, so I don't need volume pot, headphone jack won't be mounted on the board, and the power for the SS will be integrated...- jeanba3000
- Post #2,149
- Forum: DIY (Do-It-Yourself) Discussions