Recent content by imsurokim
-
New Dragonfly Black and Red Discussion
Yeah, battery might be an issue. It certainly drains battery more than dongle but not like 25% in an hour. I can still listen to music and play some game over an hour with 15% batter life left.- imsurokim
- Post #4,757
- Forum: Portable Headphone Amps
-
New Dragonfly Black and Red Discussion
How old is yout iPhone? I see dfr uses more battery than dongle but it shouldn’t be extreme.- imsurokim
- Post #4,755
- Forum: Portable Headphone Amps
-
Home-Made IEMs
I understand now. So if I want more bass from my w3 driver (TWFK+CI) and decided to add one more CI to my configuration, can I just connect them parallen and give proper damper?- imsurokim
- Post #8,334
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
I used this product, straight out from box but upright position with no mirror on the bottom. I will try couple more times and hopefully it gets better. I am not expert on any of electrical engineering, so I am not getting this 100%, but I might want to try add driver to my GV later if I want...- imsurokim
- Post #8,332
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Thanks! I used your recipe to make negative impression, but eyeballed 1oz of glycerin not measuring exact amount. First negative impression was not firm enough it cut to pieces when I try to pull it out from container, so I heated left over and put more glycerin, and got that one on the picture...- imsurokim
- Post #8,326
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
It is little embarrassing, but here is picture of my okay shell. It turned opaque white after cleaning with 99% Isopropyl alcohol and sanding. It was transparent before that. There is huge bubbles inside, uneven shell width, and quite shallow to fit driver and MMCX adaptor in perfect position...- imsurokim
- Post #8,324
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Great community!!!! So I wasn't giving enough UV to the bottom of the mold. I screwed up first mold by not covering up the top(gave me solid piece), second with whole showing in pictures and third one I cured longer time same position and got thicker outer wall, but still thin U shape but no...- imsurokim
- Post #8,323
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Thanks. I should try that. Here is picture of my first shell which has huge hole in the middle. I think I wasn’t curing it long enough. Or my negative impression has uneven spacing between side wall and where resin is.- imsurokim
- Post #8,320
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
I guess I will try that later when I get used to making shell and have one perfect sounding ciem with dampers. I saw one of your picture with crazy configuration. I was surprised that everything fits in to your shell. My shell turned out to be really small and had hard time fitting 3 drivers.- imsurokim
- Post #8,318
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Will red on TWFK kills too much treble? I ordered couple of GV and GK and was thinking about putting green on TWFK and RED or ORANGE on HODVTEC. Is adding one more bass driver a whole different story than just adding damper?- imsurokim
- Post #8,315
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Thanks for the tip. I will try to make them angled later. I have oem westone w3 driver. I temporary pushed iems to my ear with fingers to have air tight fit, still lacks little bass to my taste. I think they have two TWFKs + CI22955. I used WHITE damper for TWFK 5mm apart and RED damper on CI...- imsurokim
- Post #8,312
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Just finished my first iem, didn't turned out correct. First MMCX adaptor is installed too close to ear so I cannot fit them perfect in my ear. However, I was able to get decent sound when I push them towards my ear. I am trying to rebuild them since it wouldn't work. Is there any way I can...- imsurokim
- Post #8,310
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Thanks for info. I will try them.- imsurokim
- Post #8,264
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Made my negative impression yesterday, but didn't work well. I diy'ed my container, but had rough surface on the bottom so it flooded out to bowl. It firmed perfect after putting it in fridge, but when I take it out from bowl, everything ripped a part. I guess I needed little more glycerin to...- imsurokim
- Post #8,261
- Forum: DIY (Do-It-Yourself) Discussions
-
Home-Made IEMs
Ouch... That doesn’t look good I just manage to get my second impression for right ear. He made sure it goes deep this time.- imsurokim
- Post #8,252
- Forum: DIY (Do-It-Yourself) Discussions