HenacanPodwell's latest activity
-
HHi all, I just finished reading the whole thread from the beginning 🤯 respect for everyone, I found the forum after creating my first...
-
HHenacanPodwell replied to the thread Home-Made IEMs.I see! Thank you for the reply! I tried adding rc filter to my mid high drivers just to test it out and see if it changes from different...
-
HActually re-reading your post it seems you might be aware of the effect of different OI on your iem. Regardless, when you add/change...
-
HThis is due to the effect of the various Output Impedances of your sources with your iem (which is BA based and has a non linear...
-
HHenacanPodwell replied to the thread Home-Made IEMs.Hello guys! I am facing this problem frequency changes on different amp. I have been using my Ifi nano BL iematch which is for sensitive...
-
-
HHenacanPodwell replied to the thread Home-Made IEMs.Hello everyone, anyone know where I can find sonion e25 series of super tweeter? I searched everywhere but I couldn't find one, the only...
-
HHenacanPodwell replied to the thread Home-Made IEMs.I see! Thank you very much!
-
HNothing really, good phase aligment does exactly that: Avoiding cancellation...
-
HHenacanPodwell replied to the thread Home-Made IEMs.I see! Besides phase cancellation, what else does a good phase alignment do? I see big company like JH always make sure their phase...
-
HWell it does effect phase, it just doesn´t effect it very much. Imagine a sine wave at 150Hz. You want to avoid that the peak of one...
-
HHenacanPodwell replied to the thread Home-Made IEMs.What does this means? I am confused. Does that means that using a longer tube for bass driver shouldn't affect the phase?
-
HThe Wavelength of 150Hz for example is 228cm don´t worry about tube length ;)
-
HHenacanPodwell replied to the thread Home-Made IEMs.I am using 1.2mm for 22955, and a short 2mm in the middle for the damper to sit on. I was thinking of even longer tube (3 cm) but it...
-
HOut of curiosity, what diameter tube are you using? You can increase bass response/limit HF by going to a smaller diameter...say 1MM or...
-
HHenacanPodwell replied to the thread Home-Made IEMs.Oh! I havent really tried using L pad, have been reducing spl with only resistor but it somehow flattens the low which is not a good...
