discus123's latest activity
-
a tube from front(ear nozzle) going through faceplate at back yes you need to drill and for DD build i feel its better to use 10mm and... -
discus123 replied to the thread Home-Made IEMs.I used this as my sample to fine tune my set of BAs. 38AM at start I used 20R but bass too much. I then added by 10R plus another 10R...
-
-
Make a bass leak tube with damper in it
-
discus123 replied to the thread Home-Made IEMs.Hi all, anybody have tried this set of BA, 38AM / 37AP / 2x32254, I wanna reduce 3-5 more db on bass. I have used a very big value of...
-
-
🙂
-
Having a rough time with the circuit design on this 4x 32257 and 31736, starting to think I should have used a 30017 instead. And/or...
-
discus123 replied to the thread Home-Made IEMs.Hi all, @dhruvmeena96 My conifg for above is 38am / 28uap / 2389 / 31736, 2 tubes of ID 2.0mm for low and high. My problem is I want to...
-
-
🙃
-
I think the person was asking about the E25ST001/D, E25ST002/D, and/or the E50DT0005/D.
-
low pass but the Henry value is so low, i think its only for very minor fine-tuning and nothing else i cannot consider it as a definite...
-
Hmmmm Having bigger cap will cause you to have those peaks. Ok here is my suggestion Run swfk on fullrange and first adjust tube...
-
https://toidsdiyaudio.com/2018/01/04/the-best-frd-and-zma-tracer-html-2018-01-the-best-frd-and-zma-tracer/ Make an impedance measuring...
-
For the max SPL, it will be necessary to adapt the strongest drivers on the weakest drivers. A driver can have a given constructor max...
-
Man...... That's some next level poking Hahahahha Also No need to share We have @stephensynanta16 As you have given us the idea He...
-
yes I have a site in progress in domain name, I will pass it to you in MP for the moment, I come to discuss from time to time here in...
