discus123's latest activity
  • discus123
    discus123 reacted to Wgibson's post in the thread Home-Made IEMs with Like Like.
    Closest I've built was a hybrid, but go big on the 29689 tube, 1.5mm ID or bigger could work too. 1mm ID on the 38dixj, damp per...
  • discus123
    discus123 reacted to Xymordos's post in the thread Home-Made IEMs with Like Like.
    Some update on what I've built recently - a 6 driver hybrid, using 4 dynamic drivers and a SWFK. Integrating the SWFK was really...
  • discus123
    discus123 reacted to Aldo40's post in the thread Home-Made IEMs with Like Like.
    @swtnate for my part I use this My first Elegoo pro mars 2K then I went to Asiga freeform pro 2-75 and recently Elegoo Mars 3 mono...
  • discus123
    discus123 reacted to Aldo40's post in the thread Home-Made IEMs with Like Like.
    Personally.I’m no problem with drève lake 3 with brush. 5 minutes to turn in UV OFF, and then I turn on the UV, I’m no bubble it’s real...
  • discus123
    discus123 reacted to mattmatt's post in the thread Home-Made IEMs with Like Like.
    I use the 365nm one. I don't have problems curing dark colors with this one. Tho I use a different one for my clears because this is...
  • discus123
    discus123 reacted to ForceMajeure's post in the thread Home-Made IEMs with Like Like.
    I really don't recommend doing the trimming part in Fusion...I have no idea about the smoothing that way and what features of the ear it...
  • discus123
    discus123 reacted to ForceMajeure's post in the thread Home-Made IEMs with Like Like.
    Are you importing your impressions before or after the digital trimming process (via meshmixer f.e)? I assume once trimmed and...
  • discus123
    discus123 reacted to swtnate's post in the thread Home-Made IEMs with Like Like.
    Also, if you’re using an LCD/ Mono printer, those long exposure times cause undue heat exposure to the LCD screen. Depending on the...
  • discus123
    discus123 replied to the thread Home-Made IEMs.
    ok, I'll try it tomorrow. thanks mattmatt
  • discus123
    discus123 replied to the thread Home-Made IEMs.
    The come out of the shell is very good, no more that extra layer of cured resin inside the shell. It is smoother and more finer than...
    • 1632241608743.jpeg
  • discus123
    discus123 replied to the thread Home-Made IEMs.
    Here is the 3D printer layouts and settings
    • Snap3.png
    • Snap2.png
  • discus123
    discus123 replied to the thread Home-Made IEMs.
    I'll show you while I back home. thanks mattmatt
  • discus123
    discus123 replied to the thread Home-Made IEMs.
    I set the supports 10mm hanging the shell on the build-plate. Is that too high ? I used the software that come with the 3D printer...
  • discus123
    discus123 replied to the thread Home-Made IEMs.
    Thanks all you guy helping. Thanks a million, you all are great and expert !!! I used the clear high transparency UV Resin. They just...
    • Nova clear high transparency UV resin.png
  • discus123
    discus123 reacted to kkugel's post in the thread Home-Made IEMs with Like Like.
    Slower lift and further lift generally improve results for all resins in my experience
Top