Looking to sell my Obravo Ra 21.5 C-Cu with full retail packaging and proof of purchase and a 4.4mm Eletech Aeneid reterminated to obmmcx.

RRP: £10,399

I would also consider a trade for a Subtonic STORM+cash

DESCRIPTION

The Ra range of earphones have become things of legends since their launch, just like it’s smaller brother the EAMT1. The new Ra 21.5 C-Cu version is seen as the epitome of the Ra series and comes in a gorgeous copper chassis that has been PVD coated for protection. Ra 21.5 C-Cu features revised internals with vastly improved internal damping. Alongside these improvements there has also been a major overhaul of the airflow through and around the drivers. The Ra 21 has taken over a year of testing and modifications to get even more from the huge 16mm driver and patented AMT II driver. By improving the performance of the massive 16mm driver, oBravo have managed to drastically improve the bass. This is not to say that the bass has got thicker and overpowering, but it now extends a lot lower from 100Hz down. With a change in the specification of the dynamic driver it meant that the crossover also had to be changed so that the AMT driver could be seamlessly integrated. By altering the internals so much oBravo have managed to make the Ra 21 easier to drive than the original, bringing the resistance down to 168Ohm from 182Ohm. This enables users to benefit from the great sound using a larger range of source equipment.

Creating the original Ra in 2017 was not an easy task and the 21 version has taken almost 2 years to come to fruition. The final tuning was obtained from a close collaboration between Audio Concierge’s very own Phil Wannell and oBravo. During the research and development phase it was also established that the cable was also a limiting factor in it’s performance. To that end a custom cable was introduced to the range in order to improve on Ra’s incredible performance. The new cable – called Newton Signature – consists of high purity copper and silver plated copper in a litz construction with a quick click release, 4 in 1 connector system. This will enable you to quickly swap between 4.4mm, 2.5mm, 3.5mm and 4 pole 3.5mm.

The C version means that the nozzle is made of precision ceramic which, due to its inert properties doesn’t add anything to the sound and therefor is as accurate as it can be and thus was used in the ultimate of oBravo’s offerings.

ADDITIONAL INFORMATION


WHAT'S INCLUDED

• S/M/L Silicone Eartips (Voodoo Tips)
• S/M/L Comply™ Eartips
• 1.2m – Newton Signature Earphone Cable (3 in 1 Twist Lock Connector – 3.5mm, 2.5mm and 4.4mm)
• Acacia Wood Carry Case
• High Gloss Presentation Case
• oBravo Luxury Cleaning Cloth