Listing ID:
63125
Views:
852
100.00 USD
- Condition
- Excellent/Like new
- Negotiability
- Firm
- Ships to
- United States of America
Thinning my heard of headphone amps. Had many years of enjoyment with this one.
$100 plus $15 shipping. CONUS only. PayPal FF or add %3 for GS.
-Asgard 2 is the next generation of one of the most popular headphone amps in the world, boasting higher performance and convenience features such as switchable gain and preamp outputs. It’s a versatile control center for your desktop system, ideal for most headphones from IEMs to orthos, and with pre outs for powered desktop speakers.
-We used what we learned in Mjolnir to significantly improve Asgard 2’s performance. A high-voltage, cascoded JFET gain stage feeds a high-current Class A MOSFET output section. The 80V rails on the gain stage allow us to reduce distortion, while retaining Asgard’s no-overall-feedback design in high-gain mode.
-Asgard 2 offers two gain settings. The low-gain mode is perfect for high-sensitivity IEMs, while the high-gain mode is ideal for most other headphones, up to and including many orthodynamics. In addition, the preamp outputs can easily be connected to powered speakers, for a complete desktop system.
-Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-400KHz, -3dB
Maximum Power, 32 ohms: 1.0W RMS per channel
Maximum Power, 50 ohms: 1.0W RMS per channel
Maximum Power, 300 ohms: 380mW RMS per channel
Maximum Power, 600 ohms: 190mW RMS per channel
THD: Less than 0.008%, 20Hz-20KHz, at 1V RMS, high gain mode (worst case)
IMD: Less than 0.010%, CCIR at 1V RMS, high gain mode (worst case)
SNR: More than 102db, unweighted, referenced to 1V RMS, in low gain mode
Crosstalk: Less than -72dB, 20Hz-20KHz
Output Impedance: Less than 2 ohms
Gain: High = 6 (15.6db) or Low = 1.5 (3.5db), via rear switch
Topology: Fully discrete, single-ended Class A with single voltage gain stage, no overall feedback in high gain mode, 12dB feedback in low gain mode
Protection: Standard muting relay for delayed turn-on and fast turn-off
Power Supply: Internal power transformer with 4 separate power supply rails and over 20,000uf of filter capacitance
Power Consumption: 30W
Size: 9 x 6 x 2.25”
Weight: 5 lbs
$100 plus $15 shipping. CONUS only. PayPal FF or add %3 for GS.
-Asgard 2 is the next generation of one of the most popular headphone amps in the world, boasting higher performance and convenience features such as switchable gain and preamp outputs. It’s a versatile control center for your desktop system, ideal for most headphones from IEMs to orthos, and with pre outs for powered desktop speakers.
-We used what we learned in Mjolnir to significantly improve Asgard 2’s performance. A high-voltage, cascoded JFET gain stage feeds a high-current Class A MOSFET output section. The 80V rails on the gain stage allow us to reduce distortion, while retaining Asgard’s no-overall-feedback design in high-gain mode.
-Asgard 2 offers two gain settings. The low-gain mode is perfect for high-sensitivity IEMs, while the high-gain mode is ideal for most other headphones, up to and including many orthodynamics. In addition, the preamp outputs can easily be connected to powered speakers, for a complete desktop system.
-Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-400KHz, -3dB
Maximum Power, 32 ohms: 1.0W RMS per channel
Maximum Power, 50 ohms: 1.0W RMS per channel
Maximum Power, 300 ohms: 380mW RMS per channel
Maximum Power, 600 ohms: 190mW RMS per channel
THD: Less than 0.008%, 20Hz-20KHz, at 1V RMS, high gain mode (worst case)
IMD: Less than 0.010%, CCIR at 1V RMS, high gain mode (worst case)
SNR: More than 102db, unweighted, referenced to 1V RMS, in low gain mode
Crosstalk: Less than -72dB, 20Hz-20KHz
Output Impedance: Less than 2 ohms
Gain: High = 6 (15.6db) or Low = 1.5 (3.5db), via rear switch
Topology: Fully discrete, single-ended Class A with single voltage gain stage, no overall feedback in high gain mode, 12dB feedback in low gain mode
Protection: Standard muting relay for delayed turn-on and fast turn-off
Power Supply: Internal power transformer with 4 separate power supply rails and over 20,000uf of filter capacitance
Power Consumption: 30W
Size: 9 x 6 x 2.25”
Weight: 5 lbs
Listed by:
Pappas3278 (13)
Listed:
2024-02-23
