Verum Audio - Exciting high performance DIY planar
Status
Not open for further replies.
Sep 26, 2019 at 2:25 PM Post #916 of 1,486
Best Combo!!!
LRM_EXPORT_518021062966246_20190927_034155446.jpeg
IMG_20190927_021514.jpg
 
Last edited:
Sep 27, 2019 at 2:00 PM Post #920 of 1,486
on a different issue i sent my pair back on july 29th and usps has been screwin me over as they still haven't left the usa in almost 2 months. anyone else have shipping issues?
 
Sep 27, 2019 at 4:13 PM Post #923 of 1,486
Well ... I went back and listened ... and he does say that it's got to be balanced, and he can't use the Nuemanns. No??
lmao nothing has to be balanced as that is a quote "personal" opinion. most balanced players have higher output so they don't fit the magic 8. but if you add resistors it will bring it up. keeping in mind verum is claimed from 7.4-8.0ohm basically making anything over 1 questionable. i did use with kann balanced and didn't seem to have any issue. but i had to send them back within a couple days of receiving. Garuspik has been awesome!!!!!

example on the kann
PHONES 3.5mm (0.65ohm) / Balanced out 2.5mm (1.3ohm)
the trs is well under and the trrs balanced is over the magic 8.
 
Sep 27, 2019 at 4:40 PM Post #924 of 1,486
lmao nothing has to be balanced as that is a quote "personal" opinion. most balanced players have higher output so they don't fit the magic 8. but if you add resistors it will bring it up. keeping in mind verum is claimed from 7.4-8.0ohm basically making anything over 1 questionable. i did use with kann balanced and didn't seem to have any issue. but i had to send them back within a couple days of receiving. Garuspik has been awesome!!!!!

example on the kann
PHONES 3.5mm (0.65ohm) / Balanced out 2.5mm (1.3ohm)
the trs is well under and the trrs balanced is over the magic 8.

So does the DAC have to be modded to be used with the Verum?
 
Sep 27, 2019 at 4:44 PM Post #925 of 1,486
So does the DAC have to be modded to be used with the Verum?
no just add resistors inline to cable positive leads. value dependent on players output and what level you want. it doesn't need much seeing on kann i'd need to match at min 10.4ohms. so approx 1.5ohm each pos lead.
this is how it was explained to me so it i misquoted i apologize.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread

Back
Top