Fair warning: I just updated to FW 3.0, and two bad things happened. 1) All of my PEQ presets got wiped, and 2) now when I select an AutoEQ profile, I can no longer edit/tweak it since its settings no longer appear in the custom PEQ tool. Ugh.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
The Qudelix-5K thread
- Thread starter peter123
- Start date
psp123
New Head-Fier
- Joined
- Jan 5, 2015
- Posts
- 17
- Likes
- 12
Just noticed that my EQ presets are missing after updating. Very annoying.
Ferdinando1968
1000+ Head-Fier
I had lost them with the transition to 2.0.
Or, rather, they were not actually lost, only the name was lost, the settings remained.
I noticed that with 3.0 they (optionally) enabled the same EQ mechanism as the T71, with SPEAKER-EQ and USER-EQ.
Or, rather, they were not actually lost, only the name was lost, the settings remained.
I noticed that with 3.0 they (optionally) enabled the same EQ mechanism as the T71, with SPEAKER-EQ and USER-EQ.
Sorry, guys, from where have you gotten that Firmware 3.0? I am on Android 14 and there's no Qudelix App update, yet
Ferdinando1968
1000+ Head-Fier
Sorry, guys, from where have you gotten that Firmware 3.0? I am on Android 14 and there's no Qudelix App update, yet
I got it after updating the app on IOS.
XTF1
500+ Head-Fier
- Joined
- Nov 9, 2014
- Posts
- 689
- Likes
- 751
2) The AutoEQ preset are loaded in the Speaker EQ tab, and can be edited there—they don’t appear in the User EQ tab. That is if you select the User / Speaker option. If you select the 20-band option, the AutoEQ preset are loaded as the first 10 filters and they can be edited there.Fair warning: I just updated to FW 3.0, and two bad things happened. 1) All of my PEQ presets got wiped, and 2) now when I select an AutoEQ profile, I can no longer edit/tweak it since its settings no longer appear in the custom PEQ tool. Ugh.
As @Ferdinando1968 said, this User/Speaker 10+10 bands EQ is similar to the T71.
Thank you!!2) The AutoEQ preset are loaded in the Speaker EQ tab, and can be edited there—they don’t appear in the User EQ tab. That is if you select the User / Speaker option. If you select the 20-band option, the AutoEQ preset are loaded as the first 10 filters and they can be edited there.
As @Ferdinando1968 said, this User/Speaker 10+10 bands EQ is similar to the T71.
XTF1
500+ Head-Fier
- Joined
- Nov 9, 2014
- Posts
- 689
- Likes
- 751
Forgot to mention that on my iPhone, editing a filter does not seem to work correctly: when I tap a value for editing, the num keypad appears but it hides right away.Thank you!!
Fw 3.0.0 now also available through Qudelix App update on Android.Sorry, guys, from where have you gotten that Firmware 3.0? I am on Android 14 and there's no Qudelix App update, yet
Chrome extension not yet updated though.
Chrome extension 3.0.0 also available nowFw 3.0.0 now also available through Qudelix App update on Android.
Chrome extension not yet updated though.
superuser1
Headphoneus Supremus
After the update I feel there is a slight volume glitch? I was using uapp and neutron and while reducing or increasing the volume there would be a split second spike in volume.
Anyone else experience this?
Anyone else experience this?
speedingcheetah
100+ Head-Fier
Seriously? The 3.0 firmware has been talked about since last October when they announced the upcoming changes. Plenty of warning to users about major changes, it wiping user EQ profiles, since they are getting rid of 20 band EQ etc. Very few cared.
I told them, bad move, and also foretold many users just updating, and poof, all wiped, major changes, and all mad. Especially when Quldex just says in the app when ii pops up for update, only "major changes" and that is it. Well, here we go.
I told them, bad move, and also foretold many users just updating, and poof, all wiped, major changes, and all mad. Especially when Quldex just says in the app when ii pops up for update, only "major changes" and that is it. Well, here we go.
Last edited:
XTF1
500+ Head-Fier
- Joined
- Nov 9, 2014
- Posts
- 689
- Likes
- 751
1) The PEQ presets are actually still there… but only if you select the 20-band PEQ option. You have to re-enter them in the User PEQ if you choose that option. In the end it now gives you 20 presets in the 20-band option + another 20 presets in the User PEQ option, 40 presets total!Fair warning: I just updated to FW 3.0, and two bad things happened. 1) All of my PEQ presets got wiped, and 2) now when I select an AutoEQ profile, I can no longer edit/tweak it since its settings no longer appear in the custom PEQ tool. Ugh.
speedingcheetah
100+ Head-Fier
How does it work now, if you try to import previously exported 20 band EQ profiles (in the Browser extension). Do the 20 band EQ re-apply correctly?1) The PEQ presets are actually still there… but only if you select the 20-band PEQ option. You have to re-enter them in the User PEQ if you choose that option. In the end it now gives you 20 presets in the 20-band option + another 20 presets in the User PEQ option, 40 presets total!
I guess they chose to hear out users and retained single 20 band EQ support?
XTF1
500+ Head-Fier
- Joined
- Nov 9, 2014
- Posts
- 689
- Likes
- 751
I didn’t have previously exported 20 band EQ profiles. But creating one in the Cr extension, exporting it, resetting EQ to flat, and re-importing it appears to work correctly.How does it work now, if you try to import previously exported 20 band EQ profiles (in the Browser extension). Do the 20 band EQ re-apply correctly?
I guess they chose to hear out users and retained single 20 band EQ support?
V3.0 is different, especially the DSP section, but I have yet to identify a single feature that has been wiped out…
Users who are viewing this thread
Total: 9 (members: 0, guests: 9)