[Adab]

Ok, going by the tangents parts list, what do I need to remove/add to make it plug-powered as opposed to battery powered?

Part Lists and Suggestions

thanksS

 

[Earwax]

If you want to start with a cmoy, I really recommend the BB cmoy JDS Labs, although you'll learn more doing one according to the tangentsoft directions.

I'm not keen on the idea of a A47 as a first project, there are pitfalls and it's not well documented (compared to other projects being discussed here). It's fun to experiment with after you have more experience.

 

[Adab]

I'll look into that. The main thing giving me doubts is that as I'm in the UK whatever I (attempt to) build is going to cost atleast double what it would in the US, so there's a temptation to jsut buy a prebuilt amp. No fun in that though

 

[runswithaliens]

Quote:

Originally Posted by Earwax /img/forum/go_quote.gif If you want to start with a cmoy, I really recommend the BB cmoy JDS Labs, ....

Would this little cmoyBB be able to drive a pair of 600 Ohm headphones and/or 250 - 300 Ohms? Would you need the 24 volt wallwart for that?

If not, anyone know a beginner-friendly DIY amp like this that can drive the 600 Ohm Beyers? (I haven't decided between the 250 and 600 Ohm version yet).

 

[DoYouRight]

$200 how? you need more than 1 board you need atleast a 2 board for passive ground SE and o22 also thats 300, plus tranny, plus vol control, etc