Gluegun
Headphoneus Supremus
- Joined
- Jun 21, 2001
- Posts
- 2,157
- Likes
- 10
Hi, can someone link me to an illustrated howto for the mdr-v6 to dt250 earpad replacement mod? thanks!
req: link to howto for v6 / dt250 earpad replacement?
- Thread starter Gluegun
- Start date
tomb
Member of the Trade: Beezar.com
- Joined
- Mar 1, 2006
- Posts
- 10,890
- Likes
- 1,051
Quote:
Seriously, it's not difficult enough to warrant photos.
The last time I saw the Beyer pads, they already had the thin foam cover for the drivers in the pads. If not, remove the foam liner from the Sony pads, place them on the drivers first, then put on the Beyer pads - you're done. Lately, Sony has taken to gluing the foam liner to their pads, so I had to cut mine off - that's the only trick you need to be concerned about.
Other than that, Beyer pad = Sony pad. Take one pair off, put the other pair on.
| Originally Posted by Gluegun /img/forum/go_quote.gif Hi, can someone link me to an illustrated howto for the mdr-v6 to dt250 earpad replacement mod? thanks! |
Seriously, it's not difficult enough to warrant photos.
The last time I saw the Beyer pads, they already had the thin foam cover for the drivers in the pads. If not, remove the foam liner from the Sony pads, place them on the drivers first, then put on the Beyer pads - you're done. Lately, Sony has taken to gluing the foam liner to their pads, so I had to cut mine off - that's the only trick you need to be concerned about.
Other than that, Beyer pad = Sony pad. Take one pair off, put the other pair on.
Users who are viewing this thread
