alreadyused
100+ Head-Fier
- Joined
- Aug 3, 2014
- Posts
- 409
- Likes
- 419
This seems to be the reason Audio-Gd do it
'The unit applied analog input short design :
Nowdays a lot high and middle range preamps, headphone amps and integrated amps had applied the input short design .
Without the input short design , if the amp connect to multi-ply sources and all source had playing , different sources will had the signal crossing cause the sound quality degrade .
For example, the input 1 connect to a DAC and the input 2 connect to a CDP, while both had playing, the CDP signal will crossing to the input 1 , mix with the DAC signal cause the sound degrade.
In world there are more than 99% DACs and the sources had allow the outputs short , if your DAC decalre can't short the output , please read the "Use Manual" page , pull off the jumpers for discontinue the analog input short design , but in the case , while you connect multi-ply sources, you are better only let one power on and others power off for avoid the signal crossing .'
Have to check whether my Master-6 shorts input for future reference.
Someone needs to translate that back into Mandarin and then into an understandable English.