cobaltmute
Headphoneus Supremus
- Joined
- Jul 2, 2008
- Posts
- 1,612
- Likes
- 14
As promised, here is a picture of the first error portion on the proto boards. The issue here was that I had D+ and D- reversed on my inital footprint for the USB connector
To make the board work, you need to install the resistors as shown. R1 = Red, R2 = Yellow and R3 = Cyan. The through hole for R3 is large enough to take the leads for both R1 and R2.
To make the board work, you need to install the resistors as shown. R1 = Red, R2 = Yellow and R3 = Cyan. The through hole for R3 is large enough to take the leads for both R1 and R2.