[kunwar]

Hi guys

I would like some input on what sort of cable I should use to make a K1000 adapter cable for converting XLR to 1/4" connection

ALso what pins are joined to what channels here?
Are the 2 ground pins connected to the common ground on the 1/4" jack?
Some advice would be greatly appreciated here.

regards
Kunwar

 

[Edwood]

1 - tip = Left+
2 - gnd = Left-
3 - ring = Right+
4 - gnd = Right-

Canare Starquad works quite well.

For the two grounds, you would solder both wires to the ground on the 1/4" plug.

-Ed