[Simon Patten]

. . . have never seen a USB-B DC input. Once had a [Topping E50] DAC with, I believe, a micro-USB (B) DC input and got the Topping P50 linear power supply which had an option for a micro-USB out . . .

Odd, isn't it. It's a brand new device and quite small so I was surprised that he didn't use a USB-C socket. I suggested it for the next iteration.

Looks like the 5v Elite comes with a pair of USB adapters:

Looks like a USB-C (?) and a micro-B (?) adapter?

I believe so - everything except what I need! Oh well, time to dig out the snips and soldering iron unless someone knows of an adaptor.

 

[Simon Patten]

This should work then:

https://www.amazon.com/BOLS-Compati...44&mcid=0b12435fd4f532a6b6216678e0dbf0f2&th=1

Thanks. I'd rather not have multiple adaptors like that but it's probably the simplest solution. They're cheap enough so I'll give it a go.

 

[pataburd]

I heartily agree, but there aren't a whole lot of options left here.

 

[iFi audio]

@MSXX

Follow up from other thread... (Previous inquiry)

It is completely my fault as I failed to answer the question you asked of me in the iPower X Thread. I make no excuses other than at the time of your inquiries I was coming back from surgery, and quite simply didn't see this addressed there again after your question in early December, It is my fault.

I will address this here on this thread as to not disrupt this one...

https://www.head-fi.org/threads/ifi-audio-ipower-x-the-official-thread.926656/

Please check there and I will answer your inquiry just as soon as I can. I will also post this message there so we are on the same page.

Apologies, and feel free to PM me in the future if there is anything urgent, or fill out a support ticket for any unanswered questions here...

https://support.ifi-audio.com/

Cheers!!

 

[iFi audio]

@MSXX

Thank you for your inquiry.
Unlike typical power supplies that often feature a single chassis, the iPower Elite boasts a robust design with two or three distinct chassis layers (depending on the different versions):

Version A:
1. An inner plastic-insulated chassis, serving the purpose of electrical safety.
2. An external aluminium alloy metal chassis, designed for both mechanical durability and aesthetic appeal.
This version of iPower Elite is double-insulated.

Version B:
1. An inner plastic-insulated chassis, serving the purpose of electrical safety.
2. An inner grounded and earthed metal chassis, which provides both electrical safety and EMI shielding.
3. An external aluminium alloy metal chassis, designed for both mechanical durability and aesthetic appeal.
This version of the iPower Elite is double-insulated and additionally incorporates chassis grounding.

I again apologize for letting you slip through the cracks, (Completely on Me) and in the future don't hesitate to PM me with any Urgent matters!

Cheers!!

 

[MSXX]

@MSXX

Thank you for your inquiry.
Unlike typical power supplies that often feature a single chassis, the iPower Elite boasts a robust design with two or three distinct chassis layers (depending on the different versions):

Version A:
1. An inner plastic-insulated chassis, serving the purpose of electrical safety.
2. An external aluminium alloy metal chassis, designed for both mechanical durability and aesthetic appeal.
This version of iPower Elite is double-insulated.

Version B:
1. An inner plastic-insulated chassis, serving the purpose of electrical safety.
2. An inner grounded and earthed metal chassis, which provides both electrical safety and EMI shielding.
3. An external aluminium alloy metal chassis, designed for both mechanical durability and aesthetic appeal.
This version of the iPower Elite is double-insulated and additionally incorporates chassis grounding.

I again apologize for letting you slip through the cracks, (Completely on Me) and in the future don't hesitate to PM me with any Urgent matters!

Cheers!!

Thank you for the reply Ifi

I want to ask if it is possible for me to exchange my two elite units from an A to version B?

And thank you for the detailed descriptions, but you didn’t answer regarding if version A is safe to use and lives up to safety regulations and requirements?

Like others pointed out I am concerned about safety as I have two units one at my router in the basement under my children’s room and one in the living room used with your zenStream, one that is easy for them to access.

Your description of version A sounds as if it is just an ifi power X in a metal enclosure, which is puzzling me so could you help me understand.

Looking at safety regulations regarding classification and from your description it seems that you have classified Version A as a class II device. But under section EN 60335-1 it states that regardless of insulation - double or not - if the device has provision for earthing it is regarded as a Class I under the safety regulations.

You also provide us with a 3 wire plug, a power cord with an earth connection to use with it. Again, making it a class I which regulations states that if the unit becomes faulty my children or others can’t get an electric shock by touching the metal parts of the units because it’s been bonded to earth.

Furthermore, Class II devices should be clearly marked with a certain IEC symbol which mine is missing. Which again, marks it as a class I under the safety regulations or am I missing something?

 

[iFi audio]

Thank you for the reply Ifi

I want to ask if it is possible for me to exchange my two elite units from an A to version B?

And thank you for the detailed descriptions, but you didn’t answer regarding if version A is safe to use and lives up to safety regulations and requirements?

Like others pointed out I am concerned about safety as I have two units one at my router in the basement under my children’s room and one in the living room used with your zenStream, one that is easy for them to access.

Your description of version A sounds as if it is just an ifi power X in a metal enclosure, which is puzzling me so could you help me understand.

Looking at safety regulations regarding classification and from your description it seems that you have classified Version A as a class II device. But under section EN 60335-1 it states that regardless of insulation - double or not - if the device has provision for earthing it is regarded as a Class I under the safety regulations.

You also provide us with a 3 wire plug, a power cord with an earth connection to use with it. Again, making it a class I which regulations states that if the unit becomes faulty my children or others can’t get an electric shock by touching the metal parts of the units because it’s been bonded to earth.

Furthermore, Class II devices should be clearly marked with a certain IEC symbol which mine is missing. Which again, marks it as a class I under the safety regulations or am I missing something?

I think it would be best for you to fill out a Ticket to get these questions answered for yourself directly, as I (personally) have no knowledge of electrical specifications.

Please submit a ticket here,

https://support.ifi-audio.com/

I want you to get the answers you require, unfortunately, I am not the one to do that, I hope you can understand that, and once again apologies to you.

For your assurance, I am also going to copy and paste your entire post and send it to HQ so they are aware of. Please again do the ticket thing so we can get you sorted out properly.

Cheers!!

 

[iFi audio]

Thank you for the reply Ifi

I want to ask if it is possible for me to exchange my two elite units from an A to version B?

And thank you for the detailed descriptions, but you didn’t answer regarding if version A is safe to use and lives up to safety regulations and requirements?

Like others pointed out I am concerned about safety as I have two units one at my router in the basement under my children’s room and one in the living room used with your zenStream, one that is easy for them to access.

Your description of version A sounds as if it is just an ifi power X in a metal enclosure, which is puzzling me so could you help me understand.

Looking at safety regulations regarding classification and from your description it seems that you have classified Version A as a class II device. But under section EN 60335-1 it states that regardless of insulation - double or not - if the device has provision for earthing it is regarded as a Class I under the safety regulations.

You also provide us with a 3 wire plug, a power cord with an earth connection to use with it. Again, making it a class I which regulations states that if the unit becomes faulty my children or others can’t get an electric shock by touching the metal parts of the units because it’s been bonded to earth.

Furthermore, Class II devices should be clearly marked with a certain IEC symbol which mine is missing. Which again, marks it as a class I under the safety regulations or am I missing something?

If you fill out a ticket, please PM me the number you receive so I can be sure to make sure you get answers.

Cheers!!

 

[Thorsten Loesch]

If you fill out a ticket, please PM me the number you receive so I can be sure to make sure you get answers.

Cheers!!

According to device report, the iPower was registered with ERAC. But not iPower Plus, Elite or X.

https://device.report/abbingdon-global

Of course, the device report database may be incomplete or the devices mentioned are not for sale in Australia.

You should ask your HQ to provide you with the official test reports from accredited third party testing facilities (which are mandatory for items sold in the EU, USA, CA, AUS, NZ and many other other areas) to post here, so you can dispell any doubts about the electrical safety issues.

These will state that the products are safe to use. Simple, clear and unambiguous.

I think HQ should also make sure to pre-emptively file these reports with the relevant consumer protection agencies, even where, like in the EU this is not a legal requirement. This way your customers can easily confirm if their items are safe, or not.

Thor

 

[iFi audio]

@MSXX

Please see below for certifications regarding what you have asked about.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Certificates that iPower Elite has:
- IECEE CB (53+ countries) Certification No.: DK-113974-UL
- PSE (Japan) Certification No.: JD 50499540
- KC (Korea) Certification No.: HU10488-21022A, HU10488-21023A
- CCC (China) Certification No.: 2022010807455637

The iPower Elite has been accredited under the IECEE CB scheme by UL Solution, holding the Certification No. DK-113974-UL. The number of countries participating in the CB Scheme is continually expanding. The latest list of participating countries includes: Argentina, Australia, Austria, Bahrain, Belarus, Belgium, Brazil, Bulgaria, Canada, Chile, China, Colombia, Croatia, Czech Republic, Côte d'Ivoire, Denmark, Finland, France, Germany, Greece, Hungary, India, Indonesia, Ireland, Israel, Italy, Japan, Kenya, Republic of Korea, Malaysia, Mexico, Netherlands, New Zealand, Nigeria, Norway, Pakistan, Poland, Portugal, Russian Federation, Saudi Arabia, Serbia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Thailand, Turkey, Ukraine, United Arab Emirates, United Kingdom, United States of America, and Vietnam.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Hope this info satisfies your request for information.

Also thank you to the Power X thread folks for bearing with us in these requests.

Cheers!!

 

[stuck limo]

I added an iPower X to my iFi iTube2 used as a pre-amp to my Marantz PM-8004 driving my Monitor Audio Silver 9i towers. I was previously using the stock power supply. I immediately noticed deeper, stronger, more authoritative bass. The mids *may* (MAY) be slightly richer, but I wouldn't stake a claim on it. The bass quantity though is definitely there. In fact, it may be a little *too* strong for my preferences, but it sounds really good regardless. Now I'm thinking about getting a couple of Elites for my Zen One Sig and my iTube 2. I did notice a *very* slight upgrade in sound quality when I added the Power X to my Zen so I'm wondering how far an Elite would take me.

@iFi audio how would I determine if my X units are version A or B?

 

[iFi audio]

I added an iPower X to my iFi iTube2 used as a pre-amp to my Marantz PM-8004 driving my Monitor Audio Silver 9i towers. I was previously using the stock power supply. I immediately noticed deeper, stronger, more authoritative bass. The mids *may* (MAY) be slightly richer, but I wouldn't stake a claim on it. The bass quantity though is definitely there. In fact, it may be a little *too* strong for my preferences, but it sounds really good regardless. Now I'm thinking about getting a couple of Elites for my Zen One Sig and my iTube 2. I did notice a *very* slight upgrade in sound quality when I added the Power X to my Zen so I'm wondering how far an Elite would take me.

@iFi audio how would I determine if my X units are version A or B?

Off the top of my head, I do not know, but I can ask and post back if there was an A and B for the X, and post back here when I get an answer for you.

Cheers!!

 

[OCC7N]

Feedback to iFi Audio

Make a more audiophile/luxury version of this powersupply. Better, braided/sleeved cable. Remove the big light/LED and put the money into better cable.

This SMPS is such an elegant sound on my Cisco CBS220 switch right now.

I think this power supply goes well with FMC because of the clean and elegant sound signature.

 

[pataburd]

Feedback to iFi Audio

Make a more audiophile/luxury version of this powersupply. Better, braided/sleeved cable. Remove the big light/LED and put the money into better cable.

This SMPS is such an elegant sound on my Cisco CBS220 switch right now.

I think this power supply goes well with FMC because of the clean and elegant sound signature.

Never could understand why the iPower X emits such bright light.

 

[OCC7N]

Never could understand why the iPower X emits such bright light.

THEY SHOULD BE REMOVED FROM ANYTHING AUDIOPHILE PLEASE! - iFi Audio! - I hope V2 will be proper! .,,,if they will ever make one