You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Home-Made IEMs
- Thread starter Bilavideo
- Start date
thanks for the info!Funnily enough that was one of the first configuration I built in early 2013.
From the description I'd say guys at Subtonic could be doing something of that sorts, but I really can't say for sure.
Overall I haven't revisited this type of wiring since back in the day (which I guess is telling). You might be actually better off just using say 2x3300 instead of single 3300 with split wiring - more headroom, less distortion and overall more control of the fr response as you could additionally play with resistance/inductance of each unit.
yeah the slam drivers look to be separated dual driver setups. pretty cool, tho probs not very achievable as a DIYer. (at least not without dismantling one of their iems lol)
i am limited on space as the design im going for is entirely in the ear canal. i cant fill up the concha with like a dozen drivers and still get the optimal position for the mic on my tws design. just trying to mess around with ideas to get maximum detail with minimal driver counts/driver sizes. hence tia like tubeless highs driver, and ferrofluid mids.Definitely agree here! Seems like unless you're limited by budget or space, it'll always be better just to use another driver for the same purpose.
mattmatt
100+ Head-Fier
- Joined
- Feb 11, 2012
- Posts
- 461
- Likes
- 286
I don't think that will happen since a lot of people use them wired in series.THE MAN always shows up when needed! I would think that a split would for sure lower the headroom that was designed for the driver as one driver would be pushing sub and another pushing bass. Meanwhile, I just wish Sonion sold the 3300 and 3800 pre-wired in parallel. Lol.
fair yeah. the reason i ask is that most iems and headphones have a pinna gain at 2-3k, like the harman curve. to make the upper mids and lower highs sound more natural (closer to what a typical ear hears), then they look flatter when compensating for the target curve. the flatter response on top is compensated (compensated to crins ief neutral), with the grayed out curve below being the raw measurement.I essentially calibrate and test the drivers as identical as I can get to the manufacturer test conditions. Also, I wanted an EQ that is SUPER malleable with an external Eq. But, yes, the bass was a bit TOO lacking.
your flat raw measurements kinda threw me, but i guess if the design takes EQ really well, that would be pretty easy to add pinna gain in software.
swtnate
500+ Head-Fier
I compare raw eq then make adjustments, after the set-up, by ear. My FR are always raw and always calibrated to the same peak of 130dB. That way all measurements are standardized across the 8 different driver configurations I currently build.fair yeah. the reason i ask is that most iems and headphones have a pinna gain at 2-3k, like the harman curve. to make the upper mids and lower highs sound more natural (closer to what a typical ear hears), then they look flatter when compensating for the target curve. the flatter response on top is compensated (compensated to crins ief neutral), with the grayed out curve below being the raw measurement.
your flat raw measurements kinda threw me, but i guess if the design takes EQ really well, that would be pretty easy to add pinna gain in software.
swtnate
500+ Head-Fier
Also, I no longer reference the Harmin curve. I use the updated Knowles curve with the extended high shelf.
Also, I no longer reference the Harmin curve. I use the updated Knowles curve with the extended high shelf.
Oh where is this, I'd like to take a look too
mattmatt
100+ Head-Fier
- Joined
- Feb 11, 2012
- Posts
- 461
- Likes
- 286
Oh where is this, I'd like to take a look too
thats pretty much exactly where i ended up with my own personal tweaks. adding back in the highs on iems with a harman like curve feels like you just took an earplug out of your ear. sooooo much more detail and air. without much in the way of sibilance or sharpness.
edit: (admittedly, i think i may have some hearing damage, so i may have lost some highs. tho i have yet to have my ears properly tested)
edit: (admittedly, i think i may have some hearing damage, so i may have lost some highs. tho i have yet to have my ears properly tested)
Last edited:
anyone tried sanding off or opening up the top of any drivers? im half tempted to order two pairs of rab-33518s (the automated production version of wbfk-30095), so i can attempt to delid one pair. reading 64 audio's description of how they came to the tia design mentions that they first came across the advantages of their design by sanding off the tops to expose the diaphragm.
slakoth453
100+ Head-Fier
Wanted to try that with some kz drivers but I imagine the metal dust could cause issues. I'll give it a try when I have the time.anyone tried sanding off or opening up the top of any drivers? im half tempted to order two pairs of rab-33518s (the automated production version of wbfk-30095), so i can attempt to delid one pair. reading 64 audio's description of how they came to the tia design mentions that they first came across the advantages of their design by sanding off the tops to expose the diaphragm.
There's 33AP007 if you are looking for non-vented solutionTHE MAN always shows up when needed! I would think that a split would for sure lower the headroom that was designed for the driver as one driver would be pushing sub and another pushing bass. Meanwhile, I just wish Sonion sold the 3300 and 3800 pre-wired in parallel. Lol.
3800-pre wired would be a custom part - they do exists but not available unless in x kpcs
Yup pretty much.Definitely agree here! Seems like unless you're limited by budget or space, it'll always be better just to use another driver for the same purpose.
yeah, i dont really have the tools/environment to grind the top off safely rn. i might not try with the 33518s cos they look like they are gonna need it at the very least filed off, but there are a few drivers that look like it might be possible to pry the tops off of. then again, if i can be bothered to go to the large amount of effort required, i could probs do it with a hand file safely.Wanted to try that with some kz drivers but I imagine the metal dust could cause issues. I'll give it a try when I have the time.
tomekk
100+ Head-Fier
Oof that would be too sharp for me, I'd like the 15kHz to be around the same level as 1kHz personally.