[AeroX]

I have the grey one and can confirm it sounds great!

 

[plakat]

Does the color of the IKEA chair affect frequency response? The gray one looks like it would sound good. I can’t vouch for alternate chair colors.

I also have a blue one… will have to check for sound differences

 

[plakat]

Appreciate the impressions and pics. I also use the same Ikea chair with matching ottoman in my audio rig.



I have some nyczaj pads in transit. I didnt realize the Dekoni pads were so large in comparison which to me is worrisome as a Flat pad fan. Hoping nyczaj provide a nice balance.

Your post inspired me to mod some cheap velour bowls. I removed the stock foam and replaced with much shallower foam (L-pads). The result is warmer sound than L-pad but without the skin grating itchy foam of L-pad, sortve what Im hoping of nyczaj.




Probably simpler and cheaper just to do tape mod. And I think nyczaj will be similar but look nicer.

Playing around with various pads is quite fun, so far I like the Nyczaj pads best and consider getting a pair for my RS-1 button. They change the frequency response the least from the three sets I tried, just extending bass a bit and maybe reducing treble a bit. Definitely more comfortable than the L pads.

 

[Philimon]

Does the color of the IKEA chair affect frequency response? The gray one looks like it would sound good. I can’t vouch for alternate chair colors.

The recline relaxes the highs and ottoman elevates the lows.
Color is more psychological effect modifying mood. I find grey blends in with background allowing better immersion into music.

 

[piglet]

Does the color of the IKEA chair affect frequency response? The gray one looks like it would sound good. I can’t vouch for alternate chair colors.

This caused me to remember, possibly, that back at the end of the 80s Pioneer introduced an amplifier in which the internal wires were all grey. They said this was for better sound quality. I've just had a little search of the web for any info about this, is my memory correct? I think it was the Pioneer A 400, introduced in 1990 actually, but although I can find discussion about it here and there I don't see a reference to the internal grey wiring. As it used circuit boards, of course, I suspect there wasn't a lot of wiring to be grey in any case.

 

[jonathan c]

.... after a stint with RS-1x,

Schiit Vali 3 is bringing home the goods with GH2.

 

[ESL-1]

.... after a stint with RS-1x, Schiit Vali 3 is bringing home the goods with GH2.

The GH2 is definitely on the keeper side of my ever changing list.

 

[jonathan c]

The GH2 is definitely on the keeper side of my ever changing list.

Your GH2 should be a candidate for the Nyczaj Audio hardware / Turbulent Labs headband. Think: looks , sound !!

 

[AeroX]

Ok, so my RS-1 button’s driver is dead. The voice coil has detached from the diaphragm. I have two options: switch both drivers to new x-series drivers or look for a 1st gen driver to install in place of the dead driver. What do you think? Does anyone have experience with old RS-1 with new drivers?

 

[Luckyleo]

Your GH2 should be a candidate for the Nyczaj Audio hardware / Turbulent Labs headband. Think: looks , sound !!

Just ordered another set of each. With the Nyczaj, the Grado's are more stable and sturdy without doubt. Also, I prefer the esthetics as well. Some say this impacts the sound in a positive way. I agree, though for me, it's very subtle. I can't put my finger on it.... Perhaps confirmation bias vs reality? Don't know, but I like it!

Leo

 

[jonathan c]

Just ordered another set of each. With the Nyczaj, the Grado's are more stable and sturdy without doubt. Also, I prefer the esthetics as well. Some say this impacts the sound in a positive way. I agree, though for me, it's very subtle. I can't put my finger on it.... Perhaps confirmation bias vs reality? Don't know, but I like it!

Leo

For me, the sound has more 'focus', more 'purity' .... less resonance / higher mass of non-plastic hardware (?)

 

[16tons]

I use the rs2x with the ifi hip dac mk1 and it's a good match for me, I have never listened a chord dac so I m curious about its sound. I can buy an old mojo mk1 from 2017 for about 150€, still worth? I ve read conflicting opinions

 

[Luckyleo]

For me, the sound has more 'focus', more 'purity' .... less resonance / higher mass of non-plastic hardware (?)

Sounds like what I'm hearing, but you my friend are much better at accurately verbalizing impressions, than am I.

 

[Daniel Johnston]

I use the rs2x with the ifi hip dac mk1 and it's a good match for me, I have never listened a chord dac so I m curious about its sound. I can buy an old mojo mk1 from 2017 for about 150€, still worth? I ve read conflicting opinions

Mojo1 still worth it. Chord DACs usually have a detailed more neutral sound. The Mojo1 is a hair on the warmer side compared to Mojo2. Worst case scenario is the Mojo1 needs a battery. There's a pretty solid thread on HeadFi that will give you the part number and how to guide.

I use my Mojo2/Poly with the RS2X. It's a crazy good combo.

 

[Philimon]

Ok, so my RS-1 button’s driver is dead. The voice coil has detached from the diaphragm. I have two options: switch both drivers to new x-series drivers or look for a 1st gen driver to install in place of the dead driver. What do you think? Does anyone have experience with old RS-1 with new drivers?

For vintage RS1 they might install RS2x drivers and cable, then I imagine your RS1 will sound mostly like an RS2x. Good luck! Please share pics of drivers after repair to see what they actually give you as the last couple of us accidentally received lower tier parts replacements... Please tag me when you post because I dont follow the thread consistently.