[scarfacegt]

Whats the difference beetween lc an ls cable? Want one to my fiio fh7.

 

[enai]

LC has MMCX connectors, LS has 2-pin. FH7 has MMCX -> you want LC cable

 

[cr3ativ3]

The LC-RE consists of three kinds of wires – Furukawa monocrystalline copper, gold-plated monocrystalline copper, and pure silver.This three-precious metals cable improves on the entire spectrum of sound frequencies – you will hear robust and atmospheric bass, soothing and lush vocals, as well as extended and resonant treble. The LC-2.5/3.5/4.4-D cables adopts specifically, monocrystalline pure silver instead. This means less loss when transmitting audio signals over the cable, so that significantly more details are resolved and for a purer audio experience compared to silver-plated copper and even other typical pure silver cables.
And due to individual preferences, you could read the professional reviews and comparisons, as well as try out by yourself.

Best regards

my LC4.4D is getting more stiff after the Y-split to the iems.. its getting worse over time .. is this normal? out of the box it was very soft .. meanwhile its really pretty stiff

 

[cr3ativ3]

Whats the difference beetween lc an ls cable? Want one to my fiio fh7.

LC mmcx and LS is 2pins , for the FH7 you will need the LC

 

[FiiO]

my LC4.4D is getting more stiff after the Y-split to the iems.. its getting worse over time .. is this normal? out of the box it was very soft .. meanwhile its really pretty stiff

Dear user,

No, it is not normal. Is your 4.4D cable still within the warranty? If yes, you may try to contact your seller for help first.

Best regards

 

[FiiO]

Thanks Fiio. I get an idea of the concepts. One technical question, are the wires individually insulated in the LC-RE as they are in the LC-xD? I suppose that insulation must pay great results in the LC-xD. It´s a very important design issue.

Yes.

Best regards

 

[scarfacegt]

So i managed to order the lc 2.5d and fiio btr5.But not sure if the cable is woth it? The btr5 have balanced output.But i also have an dragonfly cobalt with mqa.But the cobalt doesnt have balanced output.Then i have to switch cables now an then.And i dont like that due to damage the iems/cable.

Any thougts about this dillema?

 

[TK33]

So i managed to order the lc 2.5d and fiio btr5.But not sure if the cable is woth it? The btr5 have balanced output.But i also have an dragonfly cobalt with mqa.But the cobalt doesnt have balanced output.Then i have to switch cables now an then.And i dont like that due to damage the iems/cable.

Any thougts about this dillema?

You can always get an adapter to make the 2.5mm balanced into a 3.5mm unbalanced plug.

 

[scarfacegt]

You can always get an adapter to make the 2.5mm balanced into a 3.5mm unbalanced plug.

Tnx for reply That sounds like an option.Does it have any drawbacks? Soundquality?

 

[TK33]

Tnx for reply That sounds like an option.Does it have any drawbacks? Soundquality?

You would be makkng your balanced cable unbalanced but you would also be using the Dragonfly Cobalt vs. the BTR5. I dont have a BTR5 but compared to my Qudelix 5K and ES100, I prefer my Cobalt.

I dont really believe a cable on such a short run can make a big difference in SQ if they are of high quality. Whether an adapter would noticeably degrade sound, I have no idea (since I dont have one yet) but I doubt it. I have a 2.5mm balanced to 3.5mm unbalanced adapter from Linsoul that I ordered almost a month ago that is still making its numerous trips around the world before getting to me (ordered one because I had the same problem you did). Fiio makes one as well called the BL-35)

 

[LightBlue77]

Hey guys, i just bought a LC-4.4D(MMCX) cable, it is very well built.
But it is behind the ear and not too comfortable, i can remove the plastic foil but there is a hard piece of bent plastic next to the mmcx connector, is it possible to remove it without damaging the cable so i could wear it straight down?
@FiiO, please make cable straight and leave the option of wearing them behind the ear to the buyer.

 

[FiiO]

Hey guys, i just bought a LC-4.4D(MMCX) cable, it is very well built.
But it is behind the ear and not too comfortable, i can remove the plastic foil but there is a hard piece of bent plastic next to the mmcx connector, is it possible to remove it without damaging the cable so i could wear it straight down?
@FiiO, please make cable straight and leave the option of wearing them behind the ear to the buyer.

Dear user,

Thanks for your kind feedback. We will report your thinking to the product manager for check.

Best regards

 

[BlakeSleepy]

does anyone know if this would fit the westone um pro 30?

 

[LightBlue77]

They should, but you never know until you try if it helps, they fit Final Audio A8000.

 

[sander93]

FiiO LS-2.5D/3.5D/4.4D High Purity Sterling Silver Litz 0.78mm 2pins Balanced earphone replacement cable is now available in Aliexpress:

https://www.aliexpress.com/item/4000971671673.html

are 4.4/3.5 plugs interchangeable? (modular/switchable)
what silver cable effect on subbass/bass frequencies?