Earbuds Round-Up
Oct 8, 2016 at 12:05 PM Post #11,614 of 75,470
  Anyone tried Audio-Technica ATH-C770 on ebay for 10 bucks? Fake? Any good?

I ordered some last month, still waiting for them, maybe they'll come on the 17th but maybe the 31st
 
Oct 8, 2016 at 12:11 PM Post #11,615 of 75,470
  Anyone tried Audio-Technica ATH-C770 on ebay for 10 bucks? Fake? Any good?

 
We covered that last week - there are current quite a few fake C770 on Taobao right now that is extremely cheap (under $10), so one would expect to get an equally cheap but also equally fake C770 from eBay as well. A real C770 from Taobao will be at least twice as expensive.
 
Oct 8, 2016 at 12:25 PM Post #11,616 of 75,470
   
We covered that last week - there are current quite a few fake C770 on Taobao right now that is extremely cheap (under $10), so one would expect to get an equally cheap but also equally fake C770 from eBay as well. A real C770 from Taobao will be at least twice as expensive.

 
I missed that. Thank you for clarification. 
 
Oct 8, 2016 at 12:39 PM Post #11,617 of 75,470
We covered that last week - there are current quite a few fake C770 on Taobao right now that is extremely cheap (under $10), so one would expect to get an equally cheap but also equally fake C770 from eBay as well. A real C770 from Taobao will be at least twice as expensive.
my from Taobao very good
 
Oct 8, 2016 at 12:47 PM Post #11,618 of 75,470
my from Taobao very good

 
Yours are from a official Taobao retailer (which means you get AT's 1 yr warranty in China). Also RMB119 is probably already discounted. The regular price is RMB159. Fake one goes around RMB59.
 
Oct 8, 2016 at 1:51 PM Post #11,619 of 75,470
Don't forget to also post your "earbud hack" photos over on the new thread, DIY earbuds, as well.


Here is my mod.

http://www.head-fi.org/t/822327/diy-earbuds/30#post_12920128
 
Oct 8, 2016 at 2:18 PM Post #11,620 of 75,470
Here is my mod.

http://www.head-fi.org/t/822327/diy-earbuds/30#post_12920128


If you don't like this result, you can try the Edimun tuning as well:


source: instagram 

Apparently, there's a new venting port so you need drilling two holes approximately 1.5 - 2mm on near of the center's housing, blue tack inside and cotton to damping the side ports (at least in picture 8 looks like that). But, I believe Edifier H180 which Edimun's is based uses a different driver though, then the results will be different as expected.
 
Oct 8, 2016 at 2:31 PM Post #11,621 of 75,470
If you don't like this result, you can try the Edimun tuning as well:



source: instagram 


Apparently, there's a new venting port so you need drilling two holes approximately 1.5 - 2mm on near of the center's housing, blue tack inside and cotton to damping the side ports (at least in picture 7 looks like that). But, I believe Edifier H180 which Edimun's is based uses a different driver though, then the results will be different as expected.


Wow I may have done blue Edimonk then :grin: That blue material on the wall of the back shell could be most probably Blutac which I also did on my Monk. Thank you for the pictures mate.
 
Oct 8, 2016 at 3:10 PM Post #11,622 of 75,470
Bengkel Macro rules, that is too awesome that they posted an Instagram on how to tune a driver. I have to ask iriyan some more tuning hints over BBM :wink:

Also look! TY 650!



Very positive out of the box :package: will leave impressions later tonight..
 
Oct 8, 2016 at 5:48 PM Post #11,623 of 75,470


The easiest Monk mod:

The green thing in the middle hole is Blutac. By adding a tiny bit Blutac, the soundstage expands, the mid-bass tames a bit, more laid back mids and subbass gets more prominent.
 
Oct 8, 2016 at 8:59 PM Post #11,624 of 75,470
Hello, I was told that Shozy Cygnus cable turns to vivid green due to oxidation after few months. what happens to the sound? Does it change the sound quality? It looks weird cable color changes...
 

Users who are viewing this thread

Back
Top