Since March, when I connect the 2go, in bluetooth audio, it happens that the 2go remains in this mode although the device is off.
Clearly, I connect my tv in bluetooth audio.
the 2go led flashes magenta. The sound of my tv goes through 2go.
I’m done, I’m putting the sound back on the tv speaker,
The 2go LED is still flashing magenta
I turn off the TV.
The 2go LED is still flashing.
I turn off the Hugo2,
The LED never stops flashing magenta.
I restart the Hugo2, nothing changes.
I push the stop button of the 2go and finally the 2 go comes out of the bluetooth audio mode.
Obviously, we can only notice this by unplugging the 2go power supply.
As long as the 2go remains in the bluetooth audio mode, the 2go totally refuses to communicate in BLE and therefore, the user who leaves his 2go permanently powered, does not understand why the 2go remains invisible with Go figure since no led shows him that the 2go is in bluetooth audio.
I explained this in March, but I find that it was easier to delete my post than to take it into account.
In March, it was obvious that some users found themselves in bluetooth audio without knowing it.
And the 2go was unvisible in Gofigure.
I will assume that my lack of practice of the English language reduced the credibility of my post.
Why the led which blinks magenta without the supply by the USB, cannot it be in fixed fire magenta with the 2go supplied? And why is it in white fixed light since the led next to it is also in white light?
I have configured programmable logic controllers throughout my career. I know the importance for the user, to have always a distinctive sign for each state of the system and all the more when one is still in the development period.
And so I know the path that leads to discontent.
Having my solution, the problem no longer exists (for me). Come what may.