Auzentech X-fi Bravura 7.1 Sneak Peek
Mar 24, 2010 at 9:01 PM Post #271 of 447
I use Senn HD 555 and Senn CX 870. I use the CX 870 with music and 555 with games. Yeah, I know that 555 are meant for music, but that bass gives me headaches. I'm more of a highhead, instead of basshead
regular_smile .gif
. And the CX 870 is crystal through this card.
 
Mar 24, 2010 at 10:53 PM Post #272 of 447
Just thinking of an opamp that might offer you a bit better bass response for that card and your cans. The LME49710HA would offer better low end bass but less mid so it sounds less "husky" in comparison to the LME49720NA.
 
Mar 26, 2010 at 5:03 PM Post #273 of 447
Here are someother configuraitons I have been testing on this card:
Head amp: OPA2111AM
Fronts: LME49710HA
Rears: LME49710HA
CNT/SUB: LME49710HA/OPA227P
Sides: JRC5532 -I don't use the side outputs.
LME49710HA.jpg


These OPA2111AM's I built sound great on this design. Actually they sound great in every design I have tested them on.
Head amp: OPA2111AM
Fronts: OPA2111AM
Rears: OPA2111AM
CNT/SUB: LME49710HA/OPA227P
Sides: JRC5532 -I don't use the side outputs.
OPA2111AM.jpg


I have also been testing out the OPA627 for the headphone amplifier and it has good synergy with that design.
 
Mar 26, 2010 at 11:19 PM Post #276 of 447
Quote:

Originally Posted by ROBSCIX /img/forum/go_quote.gif
Just thinking of an opamp that might offer you a bit better bass response for that card and your cans. The LME49710HA would offer better low end bass but less mid so it sounds less "husky" in comparison to the LME49720NA.


I'm going for your recommendation and order the LME49710HA opamp with the adapter.
Auzentech, Inc. OPAMP

I will try it for the headphone output and front stereo output. Could you please explain me how many of these adapters with right - left channels do I need for these two outputs? I guess two of them, two adapters each with two opamps, but just want to make sure.
And how do I change the opamps? I just take out the ones in the socket (by pulling upright) and insert the new ones?
 
Mar 26, 2010 at 11:44 PM Post #277 of 447
You require 1 unit for each stereo output. If you want 1 for the heapdheons and one for the fronts you need to purchase 2.
Yes, pull out the old ones and inster the new ones. If you use headphones all the time you may want to just go with one.
 
Mar 29, 2010 at 5:22 AM Post #278 of 447
Quote:

Originally Posted by ROBSCIX /img/forum/go_quote.gif
This is not the card you're looking for. There are not any recent consumer based cards that offer S/Pdif decoding through hardware.


Actually it not that expensive after checking...
But you know for a fact it doesn't do dd/dts decode, only s/pdif-in?
The only other recent cards I've found seem to be creative, but decode apparently only works well in XP
frown.gif
 
Mar 29, 2010 at 11:53 AM Post #279 of 447
Yes, I know for a fact. No input decoding just normal stereo PCM S/pdif input.
I have mentioned that fact to you that many of the cards that do offer decoding have had those features removed in Vista.
 
Mar 30, 2010 at 7:04 PM Post #281 of 447
Quote:

Originally Posted by Juiced /img/forum/go_quote.gif
can the HP AMP with AD797BR handle AKG K702?


Yes, the AD797 will be used as a Pre-buffer, all the power for the amplifier comes from the discrete amplifier section. If you look you can see a bunch of small surface mount transistors. You will be fine as this amplifier has a great deal of power.
 
Mar 31, 2010 at 5:36 PM Post #283 of 447
Is the Bravura better than the Forte for music and movies? I know the Forte has the Creative X-chip and EAX5 but I was wondering if the Bravura is just the Forte minus those components/features or is it internally different?
 
Mar 31, 2010 at 6:18 PM Post #284 of 447
Stock, the output sections are very similar. However, the Forte only has one swappable opamp on the front channel output. Other aspects are very similar such as the capacitors and layout. The BRavura 7.1 uses a software chip and the Forte uses a hardware DSP chip. The chips are different as on the BRavura gaming support is done through software. I put the Bravura aginst a Forte and played a bunch of games and they measured very close.
 

Users who are viewing this thread

Back
Top