3.5 mm
  1. SGOR LUNA 13.5mm Planar IEMs

    SGOR LUNA 13.5mm Planar IEMs

  2. BGVP DX7

    BGVP DX7

    BGVP DX7 Flagship Earbuds
  3. Simgot EM10

    Simgot EM10

    SIMGOT EM10
  4. Fiio JA11

    Fiio JA11

    FIIO JA11
  5. LETSHUOER DT03

    LETSHUOER DT03

    LETSHUOER DT03 dongle DAC/AMP Dual ESS SABRE ES9219C DAC chips and a dedicated high-precision clock crystal oscillator module, which lowers jitter significantly. Mode switch between low and high gain, dedicated volume controls on the unit. DT03 supports PCM up to 32bit/384Khz and DSD up to...
  6. SHOZY MXN

    SHOZY MXN

    SHOZY MXN 32ohm 15.4mm Dynamic Driver Audiophile Earbud Specification Driver: 15.4mm Dynamic driver Frequency Range:18 Hz-22 kHz Impedance:32 Ohm Sensitivity:110 dB SPL Plug:4.4mm balanced Plug Cable Length: 1.2M
  7. K

    best shielded IEM's? (EMC, EMI, RFI)

    I need insight into the best quality, shielded IEM's. I know most manufacturers do not disclose internally shielded components, but I'm still seeking info.
  8. Belaraza

    Difference between 2.5,3.5 and 4.4mm outputs?

    Hey there, Is there any real difference that is noticeable between 2.5 and 3.5mm? I mean the balanced output can get louder of course but Im not sure if there is a reason to give up the 3.5mm comfort just for something louder. When I tried a 2.5mm cable and audio matched I did not notice a...
  9. Hiby R3 Pro Saber 2022 DAP

    Hiby R3 Pro Saber 2022 DAP

    Hiby R3 Pro Saber 2022 DAP Specs: Flagship Dual ES9219 DAC Chips •3.5mm PO: 32 ohms loaded •2.5mm BAL: 32 ohms loaded Output power: •3.5mm PO:101mW •2.5mm BAL: 340mW Maximum output voltage: •3.5mm PO: 1.8Vrms •2.5mm BAL: 3.3Vrms Rated output voltage: •3.5mm PO: 1.5Vrms •2.5mm...
  10. TRUTHEAR SHIO

    TRUTHEAR SHIO

    FEATURES: ■ Supports up to PCM 768 and DSD256. ■ Incorporates two types of audio output jacks, a 3.5mm TRS and a 4.4mm TRRS. ■ CNC anodized metal chassis with seamless leather cover for classy and premium look. ■ Interchangeable cable. ■ Hardware volume keys. ■ Manual switch for gain mode (Low...
  11. K

    Bluetooth receiver to 3.5mm

    Hi, do you guys have any recommendations for a good bluetooth reciever dac that has an 3.5mm output? My audioengine a5+ is without bluetooth and I don't use spotify anymore. The speaker has a usb-port to power external devices. I live in Sweden, Europe. Thanks
  12. R

    MacBook Pro 2021 3.5mm Headphone port - upgraded

    As Daniel L has reported, Apple is improving it's headphone port for quality and to drive sensitive kit. https://www.head-fi.org/threads/macbook-pro-m1-pro-max-3-5mm-output.960345/ https://support.apple.com/en-us/HT212856 If anyone has experience of it and knows its quality and/or its...
  13. CEntrance HiFi-M8 V2

    CEntrance HiFi-M8 V2

    "Get the most advanced portable amplifier and DAC by CEntrance. With USB digital input, 3.5 mm analog input and wireless Balanced Bluetooth input, this is our best portable amplifier yet! Exclusive CEntrance technology for extra audio enjoyment. Balanced circuits offer significant improvement...
  14. Audirect Beam 3 Plus

    Audirect Beam 3 Plus

    Hilidac's Audirect Beam 3 Plus is a portable DAC/amp. Key features include: Bluetooth 5.0 (LDAC supported) 3.5mm single ended / 4.4 balanced output USB-C for connecting with PC and mobile ES9281AC decoder chip, Qualcomm CSR8675 Bluetooth chip 4.4mm: ≧ 110mW (16Ω) ≧ 230mW (32Ω) ≧ 27.78mW...
  15. B

    Does Threaded Metal Shell Connector Reduce Noise ?

    Dear Guys Hope We All in Good Condition :). #Consumer 4-Pole TRRS 3.5mm Audio Extension Cable with Microphone Support, I would like to buy some audio component. I want to extend my cheap in-Ear consumer with microphone support. Then I should buy an Audio Extension along with microphone...
  16. S

    2.5mm balanced jack

    Hello! So I got myself a Fiio Q1 MkII DAC for my Audiotechnica headphones (Ath M70x) and I am very happy with it the sound quality is amazing the sound is very pure and so on. But it has a 2.5 mm balanced headphone jack in addition to the standard 3.5mm one but I only have a 3.5mm...
  17. Andreeww

    Any recommendation for a ucb-c microphone with 3.5mm out for voice monitoring?

    I found the Byerdynamics FOX but are there any other alternatives? Thanks
  18. GaijinMo

    Connecting Headphone Amps to Display Monitors' 3.5 mm Audio Outputs

    Dear all, Just hoping for some clarification in case I have been misunderstanding previous threads on this subject. Nowadays, most LCD monitors have a 3.5 mm audio line out (for connecting powered speakers) and/or a 3.5 mm headphone jack. My questions can be summarized as the following: Since...
  19. Rode SC3 3.5mm TRRS to TRS Adaptor Cable

    Rode SC3 3.5mm TRRS to TRS Adaptor Cable

    The Rode SC3 is essentially the only easy-to-get adaptor that creates compatibility between a TRRS device and a connected TRS device. Specifications Brand: Rode Model: SC3 Dimensions: 7.6 x 2.5 x 7.6 cm Weight: 113 g Interface: 3.5 mm audio Available Color: Black with grey Earphone plug...
  20. Bang & Olufsen earset 3i

    Bang & Olufsen earset 3i

    Designer Anders Hermansen Design: Ear-bud - over-the-ear mount Dimensions 35 x 59 x 14 mm Weight (complete set) 23 g Finish Aluminium and soft-touch rubber Frequency Response: 50hz-20khz Impedance: measured ~20ohm Cable: 1m with iphone 3-button/mic Plug: 3.5mm straight Released: 2011
  21. Trasselkalle

    Nice USB-C dac to 3.5?

    For the times that I travel far, I don't like to carry my portable dac both as it adds bulk and the battery situation. I would instead just want a simple USB-C to 3.5 dac adapter for those situations. Are there any that stand out, or is it pretty much the same level whatever you get? It is...
  22. H

    USB type C vs. 3.5mm jack

    Since most new Smartphone manufacturers ditch the 3.5mm jack, i am curious, if headphones who connect via the type c port would have the same sound quality?
  23. FrequeAudio

    Best 3.5mm converter

    Hello all, I would like to get input/help on purchasing a 3.5mm converter. I just picked up the Sennheiser HD 800s and I have both XLR 4-pin cable and 6.3mm cable. Which would provide the best quality? A XLR to 3.5mm or 6.3mm to 3.5mm? So far, I have only found that the XLR converter is more...
Back
Top