is it worth upgrading my dt231s to the sony v6? using a cambridge audio amp. thanks!

cheers guys. If I`m going to have to get a whole new set I might get the sa5000`s. Any body tried these from a intergrated amp? the cambridge 640a v2 jack has 10 ohms impedence, not sure bout the power rating.

hi, I`m using my dt880 250ohm version through my cambridge audio 640a v2 amp and find it under powered, is it true that beyer do a 32 ohm version? or could I upgrade the cable to lower the resistance? If not i`m looking at getting a sa5000 as it only has 70 ohms resistance so I should be...

managed to get into it, Seems ok a little dusty tho. I accidently pulled the pcb out of the bottom shell there was a resistor attaching the pcb to the bottom shell- I seperated them but the unit still works so I`m not sure what it does. Might be for grounding.

My D-ne10 has started Shutting down when listening, I get a loud Crack noise through the headphones then the battery is completely drained. I`m thinking it might be shorting out on some fluff or dust in the unit. Problem is i can`t get all the screws out because the lid gets in the way and I...

just noticed that I can hear slight hissing through my phones when the amp is on at miniumum volume, will this damage the voice coils if I continue to leave it on when not in use?

any one got any ideas how to get into it? or any internal pics? thanks

hi, I`ve just replaced the horrible u connectors on my marantz pm7200, Im using a dnm reson with bullet plugs, but the cable is 0.75m long. Will I notice an improvement if I shorten it? or buy some of the amp jumpers already on the market like the russ andrew kimbers, or robert schofield...

just cleaned my marantz pm7200 speaker outs with brasso, I have no idea what the metal is(looks a dull silver like a fuse end), so i`m not sure i`ve done the right thing. any body know if this is ok?

anyone tried creek obh21-se + DT880?

I`ve been using the cardas caps for a few months now an am noticing the I`ve lost some of the high frequencies and some of the `air` to the music. has any one else found this?

the only other phones I have are the d66 eggos and beyer dt231 which seem to have more `air` to them but I was guess that was because their headphones.

I`m using the tri flanges, i struggle to get a seal with the foamies. I`m using the er-4p with the s cable. I do notice the sound drops out when i move the s cable sometimes. I could be pushing the plugs in too far. the last flange is inside my ear just.

I always hear the er-4s have great treble and sparkle. But i`m finding mine have a recessed high end, no sparkle, And sound very closed in. They`ve been run in. I`ve changed the filters. To no success. Has anyone else had similar problems?

Hi, I`ve owned the E-10 md player for some time and think that it sounds ok, but do you guys reckon that a d-ne20 cd player would sound better? or should i hold out for a d-ej2000 on ebay? or stick with the E-10? Help me head-fiers!!