is it worth upgrading my dt231s to the sony v6? using a cambridge audio amp. thanks!

cheers guys. If I`m going to have to get a whole new set I might get the sa5000`s. Any body tried these from a intergrated amp? the cambridge 640a v2 jack has 10 ohms impedence, not sure bout the power rating.

hi, I`m using my dt880 250ohm version through my cambridge audio 640a v2 amp and find it under powered, is it true that beyer do a 32 ohm version? or could I upgrade the cable to lower the resistance? If not i`m looking at getting a sa5000 as it only has 70 ohms resistance so I should be...

managed to get into it, Seems ok a little dusty tho. I accidently pulled the pcb out of the bottom shell there was a resistor attaching the pcb to the bottom shell- I seperated them but the unit still works so I`m not sure what it does. Might be for grounding.

My D-ne10 has started Shutting down when listening, I get a loud Crack noise through the headphones then the battery is completely drained. I`m thinking it might be shorting out on some fluff or dust in the unit. Problem is i can`t get all the screws out because the lid gets in the way and I...

just noticed that I can hear slight hissing through my phones when the amp is on at miniumum volume, will this damage the voice coils if I continue to leave it on when not in use?

any one got any ideas how to get into it? or any internal pics? thanks

hi, I`ve just replaced the horrible u connectors on my marantz pm7200, Im using a dnm reson with bullet plugs, but the cable is 0.75m long. Will I notice an improvement if I shorten it? or buy some of the amp jumpers already on the market like the russ andrew kimbers, or robert schofield...

just cleaned my marantz pm7200 speaker outs with brasso, I have no idea what the metal is(looks a dull silver like a fuse end), so i`m not sure i`ve done the right thing. any body know if this is ok?

anyone tried creek obh21-se + DT880?

I`ve been using the cardas caps for a few months now an am noticing the I`ve lost some of the high frequencies and some of the `air` to the music. has any one else found this?

the only other phones I have are the d66 eggos and beyer dt231 which seem to have more `air` to them but I was guess that was because their headphones.

I`m using the tri flanges, i struggle to get a seal with the foamies. I`m using the er-4p with the s cable. I do notice the sound drops out when i move the s cable sometimes. I could be pushing the plugs in too far. the last flange is inside my ear just.

I always hear the er-4s have great treble and sparkle. But i`m finding mine have a recessed high end, no sparkle, And sound very closed in. They`ve been run in. I`ve changed the filters. To no success. Has anyone else had similar problems?

Hi, I`ve owned the E-10 md player for some time and think that it sounds ok, but do you guys reckon that a d-ne20 cd player would sound better? or should i hold out for a d-ej2000 on ebay? or stick with the E-10? Help me head-fiers!!

mp3 play back is really good. took me along time to even try playing mp3`s on it! I`m such a compression hater!

My Marantz cd7300, has for some reason started to get noisy when spinning discs, clicking and rattling quite badly. has anybody had similar problems?

Are there any head-fiers out there who`ve had much experience in contact enhancers? I clean my connections in 99% Isopropyl Wipes is this a good idea? I`ve Been looking at Caig, Van Den Hul - The Solution, DNM Reson Licon, and Walker SST enhancers. Are they worth trying if so which would...

im using stock cables, on all my kit the cable seems very much attached to the unit, so i dont think i could upgrade to shielded cables.

just a little question! i know its not good to have power cords too close to signal cable but does it matter if power cords are to close to each other. because my floors like a snake pit of power cords! if so what do you do to sort the problem out?

Sounds Great! really warm, and everything has real weight to it. I`ve left it running in for Bout 24Hrs and the things still cold! i`m very impressed by this player!!

took your advice! managed to get a cd7300 for £250 from superfi.co.uk. ...strange that more people didnt have any opinions on this player.

hey, just checking peoples thoughts on this player, and if its worth upgrading to over my cd5400. thanks!