Quick qn re DI-20HE - how can I tell what the Ext clock input impedance is 75/50ohms etc and does it take square or sine or both? I ask as I tried to use one of my spare ports on the OCK-2 (square + 75ohm I believe) to the DI-20HE but it said FAIL or similar error message when I tried to switch to external. Might have been a cable issue too I guess, only tried briefly with that one.
Audio-GD DI-20
- Thread starter soundlogic
- Start date
It takes both but native square
That one is 10Mhz 50Ohm
This one is 10Mhz 75Ohm
I made the red cross indication: DO NOT USE
Yes it occurred to me after I might’ve accidentally plugged it into the wrong one.. was battling with one of those heavy garden hose like LMR400 cables. Will try again tomorrow.It takes both but native square
That one is 10Mhz 50Ohm
This one is 10Mhz 75Ohm
I made the red cross indication: DO NOT USE
For now I’m just about to dial up the Phoenix incl feeding the DI-20HE with it which is what Brett plans to do with it I understand, such decadent overkill but then I’m just envious!
Mr Brett
100+ Head-Fier
For now I’m just about to dial up the Phoenix incl feeding the DI-20HE with it which is what Brett plans to do with it I understand, such decadent overkill but then I’m just envious!
As you would expect, I'm interested in the Phoenix to the DI-20HE.
DI20HE vs INNOUS
Yes, but Phoenix has USB output, DI20HE not.DI20HE vs INNOUS
Last edited:
sajunky
Headphoneus Supremus
I am personally interested to know how a typical $50 high-speed isolated hub is working with DI-2x. I mean, if I get a hub first, it will be wasted after purchasing DI-24 or not.
I read from @Jake2 that UIP (which is expensive stuff) is not a replacement for DI-24HE and chaining UIP is beneficial. $50 hub is expected to share the same properties, question is about scale of the improvement.
Users who are viewing this thread
