Muziqboy
500+ Head-Fier
I don't believe the SU-1 does SPDIF reclocking like the Mutec but instead has a WORD CLOCK out which can be hooked up to the RedNet and used as a Master Clock.
AUDIO over IP - REDNET 3 & 16 Review. AES67 Sets A New Standard for Computer Audio
- Thread starter rb2013
- Start date
joelha
100+ Head-Fier
- Joined
- Oct 25, 2012
- Posts
- 129
- Likes
- 13
I found it - Lowes 1.5" by 2.25". I like to use some fine sandpaper on the edge if it has any bur left.
The 1.5" fits over all my power cords with a nice lose - but not to lose fit.
rb2013,
First, thanks so much for this information.
Second, I want to thank you for taking so much time to share so much information on this thread. You've been a big help to me and, I strongly suspect, to many others as well.
Thanks for helping me to enjoy my audio system that much more than I had before.
Joel
Albrecht
100+ Head-Fier
- Joined
- Feb 8, 2016
- Posts
- 184
- Likes
- 31
No problem. Yes that NADAC thread was interesting. However there was attacks on AOIP involved there as well. The OP went back and edited several positive posts with negative, then closed the thread. Then proceeded to launch attacks together with a partner on other threads and forums. But he was busted red handed and exposed later on. It's crazy how cutthroat the audio business is.
jabbr
100+ Head-Fier
- Joined
- May 28, 2009
- Posts
- 338
- Likes
- 25
...
rb2013
Author of The 6922 Tube Review
- Joined
- Apr 12, 2013
- Posts
- 5,930
- Likes
- 514
I'd get the D16 too for that price difference. Crazy that pricing. Can I ask the Euro price for the D16?
rb2013
Author of The 6922 Tube Review
- Joined
- Apr 12, 2013
- Posts
- 5,930
- Likes
- 514
Thanks for that!
Same here, I want to pass my experiences along. They're just mine.
somestranger26
1000+ Head-Fier
- Joined
- Dec 6, 2007
- Posts
- 1,257
- Likes
- 48
Argh I got the single-mode fiber cable and the transceivers, but one of them they sent the wrong item - MC200CM - which is multimode so I can't use it. Back to Amazon you go...
The power supply is 9V 0.6A input if anyone is wondering.
Edit: I just placed another order and got Amazon to give me free 1-day shipping so I should have another one Friday.
The power supply is 9V 0.6A input if anyone is wondering.
Edit: I just placed another order and got Amazon to give me free 1-day shipping so I should have another one Friday.
rb2013
Author of The 6922 Tube Review
- Joined
- Apr 12, 2013
- Posts
- 5,930
- Likes
- 514
So we have confirmation the Gumby MB takes the RN D16 SPDIF RCA and BNC.
The YGGY does not directly. But does take the Mutec SPDIF RCA and BNC from the RN 16D
The YGGY does not directly. But does take the Mutec SPDIF RCA and BNC from the RN 16D
Soundsgoodtome
Headphoneus Supremus
After some dialogue in a PM, it seems the Schiit YGGY is to blame. Schiit was offering free service swaps for their BNC/RCA connections with improper impedance when you sent your DAC in for service. Perhaps it's time to contact the Schiit service dept to get proper impedance connections if you're getting into Rednet products. The Focusrite guys will probably want to hear this as well. Again this only applies on the Schiit Yggy
Attn: @Jason Stoddard
Attn: @Jason Stoddard
joelha
100+ Head-Fier
- Joined
- Oct 25, 2012
- Posts
- 129
- Likes
- 13
OK, I have to confess, I could use a little help here.
I have the Mutec MC-3+ USB but don't know how to set Dante controller to sync externally.
When I try to check the box for that option, it doesn't stay checked.
What am I doing wrong?
Thanks.
Joel
I have the Mutec MC-3+ USB but don't know how to set Dante controller to sync externally.
When I try to check the box for that option, it doesn't stay checked.
What am I doing wrong?
Thanks.
Joel
mourip
1000+ Head-Fier
This issue came out a few months back. I have two Yggys. At first they were just taking them all in and paying shipping both ways. They then said that they felt it made no audible difference but would fix it when in for another repair or upgrade. They fixed my first one with with shipping both ways but I an waiting on the second. I was just using USB and now will just be using AES with my D16.
They might need to change their policy if they start getting issues with Rednet devices. Units shipped in the last few moths should have the correct BNC. If yu buy from an overseas distributor you could have new old stock.
joelha
100+ Head-Fier
- Joined
- Oct 25, 2012
- Posts
- 129
- Likes
- 13
And, as long as I'm asking, extra credit for showing me how to properly set the Mutec as an external clock via a BNC cable.
Joel
gldgate
100+ Head-Fier
- Joined
- Nov 1, 2015
- Posts
- 124
- Likes
- 25
Users who are viewing this thread
