joeexp
500+ Head-Fier
- Joined
- Aug 5, 2014
- Posts
- 654
- Likes
- 261
What mode are you using the Hugo in? Is the volume still adjustable on the Hugo or is it a fixed line out?
I am using the fixed line out - [Start-up with crossfeed button pressed.]
What mode are you using the Hugo in? Is the volume still adjustable on the Hugo or is it a fixed line out?
I got my cables from surfcables.com. One pair has an 1/8 trs on each end and a three pin xlr on the other. They made me another cable with two 1/8 for the Pono on one end and a female 4 pin xlr on the other. This way this cable can be used with most balanced headphones with a 4 pin balanced cable. Surfcables.com also re - terminated my hd 598 ' s for balanced. I received perfect cables at a reasonable price. No Voodoo or Unicorns. Perfect service as well.Do mind me asking which cable you have for balanced Pono? I have a balanced cable for HE-1000, and for acs Encores, neither off which will work in this situation. Thanks.
How does one burn in without headphones plugged in. I thought with no load, there will be no current???
dr cavalli himself suggested it was fine here
http://www.head-fi.org/t/761088/new-cavalli-audios-liquid-carbon-a-599-cavalli-amp/3765#post_12068972
you'd probably need someone who has more technical knowledge to know whats going on there, im just following the good doctors prescription
It is ok to burn in without headphones. It is better to burn in with balanced headphones. It is worse to burn in with SE headphones.
It is ok to burn in without headphones. It is better to burn in with balanced headphones. It is worse to burn in with SE headphones.
Does this mean that it's gonna take longer to burn in with SE headphones or what exactly?
Actually, I've been meaning to post about the burn in. Glad you asked.
On the big amps we always burn in for at least 50 hours before anything goes out. On the estat amps it's 100 hours.
But, there's really no way to burn the Carbons for this long which means that you will get them with about 5 minutes of runtime necessary to set the operating points.
Amp probably needs 100-150 hours, although the Carbons tend to sound pretty good right away. You can run continuously, but I recommend that you have music playing when you're doing this. Just heating the amp up for 100 hours is not nearly as useful. You don't need the volume really high. For most sources about 11 o'clock.
However, and this is important, it is always better to burn in with balanced headphones if you can. If you use SE headphones half of each channel will see different burn in conditions from the other half.