Latest Thread Images

DX90. 2X Sabre,1st page: Downloads, info&inst. . ! Lurker0 FW Mod link 1st page !!. .NEW FW! 2.3.0 . . . . .
Jul 18, 2014 at 6:07 AM Post #7,066 of 14,084
finally my dx90 just arrived. current firmware is 2.0.0. Anything I should know before upgrading? Should I upgrade it?
 
Jul 18, 2014 at 6:33 AM Post #7,067 of 14,084
syedz2ez4 said:
finally my dx90 just arrived. current firmware is 2.0.0. Anything I should know before upgrading? Should I upgrade it?
Click to expand...


You may or may not like the sound and operation of one of the newer firmwares better. Going back to 2.0.0 can be a pain or impossible (if on Mac).
 
Jul 18, 2014 at 6:42 AM Post #7,068 of 14,084
I updated it to 2.1 already. I realised there is now  a digital filter setting. How good is this? I used the batch tool and at some point my ibasso would not start up. Scared the **** out of me. I had to uninstall the faulty drivers smhw can manually installed the drivers that came with the batch tool (rockusb). Then finally it detected.
 
Jul 18, 2014 at 6:47 AM Post #7,069 of 14,084
I suggest you try each settings yourself and choose which settings sounds best. Including each FW versions. Take note that going back to 2.0.0 is not straight forward.
 
Jul 18, 2014 at 6:58 AM Post #7,070 of 14,084
I am having problems copying music to it. I do not have sd card yet but trying to put some music in interal memory. I can't seem to finish copying because after a few minutes or seconds that its connected, then an error pops up saying cannot verify where the memory is. Its like it lost connection to the internal memory. Why is this so?
 
after this occurs. The recognition is split between dx90 (E:) Fat 32 and the other removable disk (F:) and cannot copy anything into those
 
Jul 18, 2014 at 7:06 AM Post #7,071 of 14,084
syedz2ez4 said:
  I am having problems copying music to it. I do not have sd card yet but trying to put some music in interal memory. I can't seem to finish copying because after a few minutes or seconds that its connected, then an error pops up saying cannot verify where the memory is. Its like it lost connection to the internal memory. Why is this so?
Click to expand...

 
Try using a different USB port, one that is directly connected to the back of your computer or laptop. I had the same problem as you when I used external usb connection on the front of my computer case instead of direct ports.
 
Jul 18, 2014 at 7:20 AM Post #7,072 of 14,084
t.r.a.n.c.e. said:
   
Try using a different USB port, one that is directly connected to the back of your computer or laptop. I had the same problem as you when I used external usb connection on the front of my computer case instead of direct ports.
Click to expand...

Oh god thank you!! So it was jus the port? LOL i was scared I had a faulty/defective unit. Me receiving a defective vsd3s yesterday was already bad, but if my first dap (dx90) were to be defective too. What is my luck haha
 
Jul 18, 2014 at 7:55 AM Post #7,073 of 14,084
Plugging through my usb3 port replicator the computer does not see the DX90 but plugging directly to one of the buikd ports on my computer works fine
 
Jul 18, 2014 at 8:16 AM Post #7,074 of 14,084
Based on what I've read here, I've kept my DX90 at 2.0.0 and have been very pleased with the sound (unamped, into a Shure 846) for about a month now.
 
That is, until I switched back to my old Sansa Fuze (pictured below).  As much as I don't want to admit it, the sound is cleaner and more extended through the the Fuze.   Is it time for me to experiment with the other FW versions?
 

 
Jul 18, 2014 at 8:24 AM Post #7,075 of 14,084
Oh I am loving the sound coming out of the dx90
basshead.gif
. Quite the upgrade from HTC one. The CKRs 9 pairs quite well with my dx90. I am very happy with my purchase 
gs1000.gif

 
Jul 18, 2014 at 8:26 AM Post #7,076 of 14,084
bobjs said:
  Based on what I've read here, I've kept my DX90 at 2.0.0 and have been very pleased with the sound (unamped, into a Shure 846) for about a month now.
 
That is, until I switched back to my old Sansa Fuze (pictured below).  As much as I don't want to admit it, the sound is cleaner and more extended through the the Fuze.   Is it time for me to experiment with the other FW versions?
 
Click to expand...

The Fuze is a decent player. I ditched mine as I hated its stock firmware (rockbox wasn't yet available) and the hiss was, while not bad, higher than I prefer. In terms of output quality, for the price, Fuze is a big hitter. But so is the DX90, which has a measurably cleaner signal, an audibly less noisy signal, etc.
 
Jul 18, 2014 at 10:16 AM Post #7,077 of 14,084
Does burn in changes the dx90 significantly? Because I am already loving how they sound. I just wonder how a sound can be better improved than this. Never tried the Aks lineup yet.
 
Jul 18, 2014 at 11:51 AM Post #7,079 of 14,084
They actually included a burn in cable. Shouldn't that mean something?
 
Jul 18, 2014 at 12:12 PM Post #7,080 of 14,084
goodvibes said:
I wonder if those services naturally close themselves after turn on when not finding conduits as it would on a PC?
Click to expand...
No, they don't. If you manage to connect with adb to the player, you'd see them all active in the list of processes.

Actually, faster start with my changes is mostly exactly due to removed asian fonts. They are 2x20MB!

I'll post a description in a better (than Google-translated by you) English later :wink:
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 19 (members: 0, guests: 19)
Back
Top