Head-Fi.org › Forums › Head-Fi Special Forums › Premier Sponsor Forums and Sponsor Forums › Premier Sponsor Forums › Music Direct Premier Sponsor Forum › The Analog/LP Thread-- How to Improve your vinyl playback
New Posts  All Forums:Forum Nav:

The Analog/LP Thread-- How to Improve your vinyl playback - Page 2

post #16 of 26
3/21/09 at 2:50pm
fzman,

On another subject - I have an unused Air Tight PC-1. Can this be traded in towards a PC-1 Supreme?

I also have a second table, a heavily modded VPI HW 19 MK4 with a TNT platter and SDS with an ET 2 arm. How well would a Kiseki Agaat Ruby or PH Sapphire peform on it? My current phono preamp is an ARC PH-7, but I would be looking for another for the second turntable set up.

Thanks,

Bob
Reply
post #17 of 26
3/25/09 at 11:43pm
Greetings,

I'm using a NAD 5020A turntable with an ortofon M20E super. In your opinion should the table provide a decent entry level setup, and should I change the cartridge? I found some minor info on audiokarma but it seems rather unknown. How do I know if the cartridge is old/used enough that it needs to be replaced regardless?

What would you suggest if I do replace it for an entry level setup?
Reply
post #18 of 26
3/26/09 at 1:31pm
Thread Starter 
Quote:
Originally Posted by randerson3024 View Post
fzman,

On another subject - I have an unused Air Tight PC-1. Can this be traded in towards a PC-1 Supreme?

I also have a second table, a heavily modded VPI HW 19 MK4 with a TNT platter and SDS with an ET 2 arm. How well would a Kiseki Agaat Ruby or PH Sapphire peform on it? My current phono preamp is an ARC PH-7, but I would be looking for another for the second turntable set up.

Thanks,

Bob
Bob, It's been a really long time since I heard anyone refer to the Kiseki cartridges ( I lusted after a Purpleheart, when they were still in production). My sense, from long-term memory, is that they would work fine on the ET arm, and the arm sure works nicely on that table. I'd keep an eye on the status of the cartridges, since they do suffer from physical aging (the donuts tend to stiffen up as they dry out) as well as from usage/wear-related aging effects.

As to the Air Tight trade-in, i will check into it for you, but feel free to call me in the meantime and I will see what might be done in that regard.

Best,

Mark
Reply
post #19 of 26
3/26/09 at 2:02pm
Thread Starter 
Quote:
Originally Posted by Shike View Post
Greetings,

I'm using a NAD 5020A turntable with an ortofon M20E super. In your opinion should the table provide a decent entry level setup, and should I change the cartridge? I found some minor info on audiokarma but it seems rather unknown. How do I know if the cartridge is old/used enough that it needs to be replaced regardless?

What would you suggest if I do replace it for an entry level setup?
Info on that table is very limited -- I would recommend that you call Bes @ 312-738-5007-- he will probably have more specific info for you.

As to the question about cartridge condition, and possible replacement, it is hard to answer without seeing/hearing it, but bear in mind that cartridges physically age beyond issues of stylus wear. There are many good, affordable cartridges that could be mounted, no matter which you chose, you would be best served getting a stylus force gauge and an alignment protractor to help you install a replacement correctly.

If you don't want to get into all of that, then I would take a look at the Project Debut III w/ Ortofon OM-5 cartridge: MUSICDIRECT - PRO-JECT DEBUT III TURNTABLE W - ORTOFON OM5 MM CARTRIDGE, on our site. This is an extremely good entry-level setup, which will give you great sound, ease of use, and a warranty. And, it can ship pretty much set up ready to play. Let me know if you have other questions about the potential upgrade.

Best regards,

Mark
Reply
post #20 of 26
3/28/09 at 1:16pm
You got my full VPI 16.5 RCM System at MD!Do you make sure ?Buy Mazda OEM Parts and Mazda Replacement Parts and Mazda Performance Parts.We stock Mazda CX-9 Parts and Accessories and offer free shipping on US.
Reply
post #21 of 26
3/29/09 at 7:23pm
Has anyone heard the new VPI “Classic Turntable”? At $2500 and with JMW-10.5i SE tonearm this sounds like a lot of turntable (and arm) for the money.

Also curious how it compares to the AVID Diva II w/Jelco SA-250ST and the Clearaudio Performance.
Reply
post #22 of 26
3/30/09 at 2:54pm
Thread Starter 
Quote:
Originally Posted by ok0510 View Post
You got my full VPI 16.5 RCM System at MD!Do you make sure ?
Yes, they are in stock, you can place an order over the phone with me at 800-449-8333, or on our web site www.musicdirect.com.

Mark
Reply
post #23 of 26
4/9/09 at 10:15pm
Will a VPI SDS work on any belt driven turntable with a standard
hysteresis motor? I may order a second one for a different turntable I have.

Thanks.
Reply
post #24 of 26
4/13/09 at 5:15pm
Thread Starter 
randerson,

The SDS ramps down voltage to about 78v, iirc, after it spins-up the platter, so it may cause problems with motors that don't like to see lower voltages. The motors that are used by vpi are configured specifically w/ film caps to be able to use the SDS.
Perhaps you can do a quick test and see if the motor runs true to speed, and does not heat up or act weirdly.

Sorry for not being able to be more specific.

Best regards,

Mark
Reply
post #25 of 26
5/26/09 at 10:59pm
great
Reply
post #26 of 26
5/27/09 at 1:47pm
Quote:
Originally Posted by fzman View Post
randerson,

The SDS ramps down voltage to about 78v, iirc, after it spins-up the platter, so it may cause problems with motors that don't like to see lower voltages. The motors that are used by vpi are configured specifically w/ film caps to be able to use the SDS.
Perhaps you can do a quick test and see if the motor runs true to speed, and does not heat up or act weirdly.

Sorry for not being able to be more specific.

Best regards,

Mark
That is very helpful.

Thank you.
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Head-Fi Special Forums › Premier Sponsor Forums and Sponsor Forums › Premier Sponsor Forums › Music Direct Premier Sponsor Forum › The Analog/LP Thread-- How to Improve your vinyl playback